We are proud to announce the all new Camshaft cam card locator. Please type in the part number of your desired Performance Camshaft into the search field below. Proper search terms are as follows (2102, 5082, 7122)
Please do not use special characters.
Performance Camshafts, Lifter Kits and Matching Valvetrain for 383-400-440 V8 Chrysler - Edelbrock.com
Camshaft: Rollin' Thunder Hydraulic Roller
Part #: #2206
Vehicle Type: CHRYSLER
Engine Application: 383-400-440 V8
RPM Range: 1500-6500
DURATION AS ADVERTISED
DURATION @ .050
LIFT @ CAM (Lobe)
LIFT @ VALVE
LOBE SEPERATION: 112°
INTAKE CENTERLINE: 107°
IDLE VACUUM @ 1000 RPM: 10"
The information below is for verification of
opening and closing events.
INTAKE TIMING @ .050" LIFT:
Opens: 14° BTDC
Closes: 61° ABDC
EXHAUST TIMING @ .050" LIFT:
Opens: 47° BBDC
Closes: 7° ATDC
OPTIONAL VALVE SPRINGS: -
CAM FEATURES: This camshaft works great when matched with Pro-Flo XT EFI system #3544 and Performer RPM cylinder heads #60929; this combo produces 517 HP / 523 ft.-lbs. of torque. Matching Edelbrock roller tappet lifter set #97483. Must use included bronze distributor gear, failure to use included could result in engine failure.
INSTALLATION NOTES: Use Edelbrock Performer-Plus Timing Chain and Gear Set #7805. Do not use late model timing chain and gear sets that are designed for emission-controlled engines. These timing sets are machined in a retarded position and are not recommended for this camshaft installation. Edelbrock Timing Sets feature three keyways for specified timing selection. Use the – (straight up) position for most applications.
Footnote 1: Use with high stall torque converter only.