We are proud to announce the all new Camshaft cam card locator. Please type in the part number of your desired Performance Camshaft into the search field below. Proper search terms are as follows (2102, 5082, 7122)
Please do not use special characters.
Performance Camshafts, Lifter Kits and Matching Valvetrain for 500+ (1965-95 Mark IV &?Gen V) Chevy - Edelbrock.com
Camshaft: Rollin' Thunder Hydraulic Roller
Part #: #2263
Vehicle Type: CHEVROLET
Engine Application: 500+ (1965-95 Mark IV &?Gen V)
RPM Range: 1500-6500
DURATION AS ADVERTISED
DURATION @ .050
LIFT @ CAM (Lobe)
LIFT @ VALVE
LOBE SEPERATION: 112°
INTAKE CENTERLINE: 109.5°
IDLE VACUUM @ 1000 RPM: 11"
The information below is for verification of
opening and closing events.
INTAKE TIMING @ .050" LIFT:
Opens: 14.5° BTDC
Closes: 62.5° ABDC
EXHAUST TIMING @ .050" LIFT:
Opens: 53.5° BBDC
Closes: 13.5° ATDC
OPTIONAL VALVE SPRINGS: -
CAM FEATURES: This camshaft works great when matched with Victor Jr. intake manifold #2902 and E-CNC cylinder heads #79559; this combo produces 676 HP / 649 ft.-lbs. of torque. Not for 1965-66 B/B Chevys requiring a grooved rear cam journal.
INSTALLATION NOTES: Use Edelbrock Performer-Link Timing Chain and Gear Set #7810 or Accu-Drive gear drive #7891. Do not use late model timing chain and gear sets that are designed for emission-controlled engines. These timing sets are machined in a retarded position and are not recommended for this camshaft installation. Edelbrock Timing Sets feature three keyways for specified timing selection. Use "0" position for most applications.
Footnote 1: Use with high stall torque converter only.
Footnote 2: Do not use dual valve springs. Use recommended valve springs with closed pressure of 120-130 lbs., open pressure of 320-340 lbs, and max lift of .700".