We are proud to announce the all new Camshaft cam card locator. Please type in the part number of your desired Performance Camshaft into the search field below. Proper search terms are as follows (2102, 5082, 7122)
Please do not use special characters.
Performance Camshafts, Lifter Kits and Matching Valvetrain for 289-302 V8 Ford - Edelbrock.com
Camshaft: Torker-Plus
Part #: #5022
Vehicle Type: FORD
Engine Application: 289-302 V8
RPM Range: N/A
DURATION AS ADVERTISED
INTAKE: 280°
EXHAUST: 290°
DURATION @ .050
INTAKE: 214°
EXHAUST: 224°
LIFT @ CAM (Lobe)
INTAKE: 0.295"
EXHAUST: 0.31"
LIFT @ VALVE
INTAKE: 0.472"
EXHAUST: 0.496"
LOBE SEPERATION: 112°
INTAKE CENTERLINE: 107°
IDLE VACUUM @ 1000 RPM: -
The information below is for verification of
opening and closing events.
INTAKE TIMING @ .050" LIFT:
Opens: 0° BTDC
Closes: 34° ABDC
EXHAUST TIMING @ .050" LIFT:
Opens: 49° BBDC
Closes: 5° BTDC
OPTIONAL VALVE SPRINGS: #5722
CAM FEATURES: Hydraulic flat tappet lifters are included with each camshaft.
INSTALLATION NOTES: Use Edelbrock Performer-Plus Timing Chain and Gear Set #7811 or #7820, or Accu-Drive gear drive #7892. Do not use late model timing chain and gear sets that are designed for emission- controlled engines. These timing sets are machined in a retarded position and are not recommended for this camshaft installation. Edelbrock Timing Sets feature three keyways for specified timing selection.
Footnote 1: Adjustable pushrods or rocker arms and screw-in studs required.
Footnote 2: Not for 1985-later engines with roller lifters.
Footnote 3: Do not use dual valve springs. Use only recommended Edelbrock Sure Seat Valve Springs #5722. Use stock ratio (1.6:1) rocker arms only.
AMC
