|
Edelbrock Fuel Filters And Inlet Kits |
 |
SINGLE FEED FUEL INLET AND FILTER KITS
These fuel inlets for Edelbrock carburetors provide a clean and custom plumbing solution. The drop-down design routes the fuel line on the right-hand (passenger side) of the carburetor below the linkage and choke housing. The #8126 includes a barbed end for a push-on 5/16" or 3/8" rubber fuel line. The #8131 and #8134 include an aluminum fuel filter with a 40 micron filter element and -6 AN female inlet will accept an Edelbrock fuel line kit for a complete fuel-pump to carburetor plumbing solution. They are manufactured of chrome plated steel and include a 5/8" -20 threaded banjo bolt with gaskets. |
 |
| Description |
Part# |
| Chromed Steel Fuel Line with No Fuel Filter and 3/8" Barbed End Inlet |
8126* |
| Single-Feed Fuel Line with Polished Aluminum Filter (Replacement Filter Only #8129) |
8131* |
| Single-Feed Fuel Line with Blue Anodized Aluminum Filter (Replacement Filter Only #8130) |
8134* |
| -6 AN Male to Barb (For Use When Using Push-on Fuel Line with #8131 and #8134) |
624010* |
|
|
DUAL FEED FUEL INLET AND FILTER KITS
These dual feed fuel inlets are designed specifically for Edelbrock Thunder Series AVS carburetors. The drop-down design routes the fuel line on the right-hand (passenger side) of the carburetor below the linkage and choke housing. Options include a barbed end for a push-on 5/16" or 3/8" fuel line or -6 AN aluminum fuel filter with a 40 micron filter element. Match with Edelbrock fuel line kit for a complete fuel-pump to carburetor plumbing solution. They are manufactured of chrome plated steel and include a 5/8" -20 threaded banjo bolt with gaskets. |
 |
| Description |
Part# |
| Dual-Feed Fuel Line with Blue Anodized Aluminum Filter (Replacement Filter Only #8130) |
8133* |
| Dual-Feed Fuel Line with Polished Aluminum Filter (Replacement Filter Only #8129) |
8128* |
| Chromed Steel Dual-Feed Fuel Line with No Fuel Filter and 3/8" Barbed End Inlet |
8132* |
| -6 AN Male to Barb (For Use When Using Push-on Fuel Line with #8128 and #8133) |
624010* |
|
|
HIGH FLOW FUEL FILTERS
Designed for high volume fuel systems these high-quality fuel filters are manufactured of billet aluminum and offer 40 micron filtration. These filters are 3" long by 1-1/4" in diameter and include a 40 micron disc element with a -6 male inlet/outlet. Match with Edelbrock pump-to-carb fuel line kits for a complete plumbing solution. |
 |
| Description |
Part# |
| Polished Aluminum Filter |
8129* |
| Blue Anodized Aluminum Filter |
8130* |
| Black Anodized Aluminum Filter |
650133* |
| Replacement Filter Element |
651670* |
| -6 AN Male to Barb (For Use With -6 AN Fuel Filter) |
624010* |
|
|
DUAL-QUAD FUEL HOSE KIT
Supplies fuel to two Edelbrock carbs when used on Edelbrock Dual-Quad manifolds. Use with a fuel hose kit such as our #8122 or #8127. 6-7/16" center-to-center, 1/8"-NPT fuel pressure port and a 3/8"-NPT fuel inlet. |
 |
| Description |
Part# |
| Dual-Quad Fuel Line Kit |
8088* |
| Dual-Quad Fuel Line Kit (Endura Finish |
8091* |
| Dual-Quad Fuel Line Kit (ProClassic Finish) |
80913* |
|
|
UNIVERSAL SINGLE-FEED FUEL HOSE & FILTER KIT
Designed for quick installation when retaining part of the stock steel fuel line, simply cut the stock line and install the compression fitting. Use supplied neoprene hose, clamp and special fuel filter and connect to carb. Will work with either 5/16" or 3/8" lines. Kit includes fuel filter, special fittings to adapt 5/16" and 3/8" steel line to 3/8" fuel hose, 24" of 3/8" fuel hose (SAE 30R7) and four stainless steel worm-type hose clamps. |
 |
| Description |
Part# |
| Universal Fuel Hose & Filter Kit |
8135* |
|
|
UNIVERSAL DUAL-FEED FUEL HOSE & FILTER KIT
Made from aircraft quality buna-N neoprene hose encased in braided stainless steel, this fuel line kit is temperature, gas and oil resistant. Made for 3/8" NPT fitting, the fuel line is adjustable between the carb bowls from 7-1/2" to 11-1/2". Includes 1/8" pipe fitting, plug for fuel pressure gauge, etc. Hose nipple not included. |
 |
| Description |
Part# |
| Braided Steel Dual-Feed Fuel Line Kit |
8101* |
|
|
FUEL PUMP TO CARB INLET HOSE KITS
These high-quality fuel line kits offer a clean and precise fuel supply line for mechanical fuel pumps with 3/8" NPT outlet to Edelbrock Single-Feed or Dual-Feed fuel inlet kits #8128, #8131, #8133, and #8134. These hose kits are pre-assembled hose with hose ends and are available with stainless steel braided hose or black nylon fabric ProClassic hose. |
 |
| Description |
Part# |
| Braided Stainless Steel Fuel Hose Kit (For S/B Chevy, S/B Chrysler, and B/B Chrysler) |
8123* |
| Braided Stainless Steel Fuel Hose Kit (For AMC, B/B Chevy, S/B Ford, 429/460 Ford & Pontiac) |
8124* |
| Braided Stainless Steel Fuel Hose Kit (For Small-Block Fords) |
8125* |
| ProClassic Black Fuel Hose Kit (For S/B Chevy, S/B Chrysler, and B/B Chrysler) |
81233* |
| ProClassic Black Fuel Hose Kit (For AMC, B/B Chevy, S/B Ford, 429/460 Ford & Pontiac) |
81243* |
|
|
FUEL PUMP TO CARB HOSE KITS
These high-quality fuel line kits offer a clean and precise fuel supply line for mechanical fuel pumps with 3/8" NPT to the 5/8" -20 fuel inlet on Edelbrock Performer Series and Thunder Series AVS Carbs. They are manufactured with Russell ProClassic hose and include fuel filter, 5/8" -20 banjo bolt and gaskets. Will not work with OEM or equivalent fuel pumps. |
 |
| Description |
Part# |
| ProClassic Fuel Hose with Street Fuel Filter |
8102* |
| ProClassic Fuel Hose with Competition Fuel Filter |
8103* |
|
|
FUEL DISTRIBUTION BLOCKS
Edelbrock has reintroduced the vintage cast aluminum fuel blocks for dual, triple and quad carb applications for your hot rod or custom applications. These fuel blocks feature a single 3/8" inlet and one, two or four 1/4" outlet, depending on application. Each fuel block has four holes for mounting to a firewall. Available as-cast or with polished finish. |
 |
|
|
|
Applications
