Heat Insulator Gaskets
Designed to help prevent fuel percolation in Performer Series and Thunder Series AVS carburetors exposed
to extreme underhood temperatures. Use #9265 with open plenum manifolds such as Torker II and Victors.
#9266 features a divided center which is designed to seal the carburetor to dual-plane manifolds including
Performer, Performer RPM and most RPM Air-Gap manifolds. All gaskets come with extended carb studs. |
 |
| |
| Square-Bore Heat Insulator Gasket (0.320" thick) |
#9265 |
| Divided Square-Bore Heat Insulator Gasket (0.320" thick) |
#9266 |
| Square-Bore Heat Insulator Gaskets for Edelbrock Dual-Quad manifolds (0.125" thick) |
#9267* |
|
| |
 |
| |
Tuning Accessories
For Performer Series and Thunder Series AVS carbs |
 |
| |
| Step-Up Spring Assortment (5 pair) |
#1464* |
| Includes 3" Hg (blue), 4" Hg (yellow), 5" Hg (orange), 7" Hg (pink) and 8" Hg (plain) springs. |
| Accelerator Pump Nozzles |
#1475* |
| Includes .024, .033, .043 nozzles and gaskets. |
| Off-Road Needles and Seats (pair) |
#1465 |
| Includes a pair of spring loaded needles and .0935" seats. |
| High Flow Needles and Seats (pair) |
#1466* |
| Includes a pair of needles and .110" seats. |
| EGR Adapter |
#1476 |
| Allows EGR valve to clear #1400 carb on #3701/#3706 manifolds or on OEM with Edelbrock carburetor. |
| Electric Choke Kit |
#1478 |
| Includes all parts necessary to convert #1404, #1405, #1407 and #1412 Edelbrock Performer Series carburetors to electric choke. Not for Thunder Series AVS carburetors. |
| Choke Cap Kit |
#1474 |
| Includes choke cap and gasket, 3 screws and 3 locking tabs. |
| Chevy/GMC Cruise Control Kit |
#1484 |
| Required for OEM cruise control hook-up. |
| Idle Mixture Screw Set |
#1496 |
| Pair of idle mixture screws and springs for all Edelbrock square-bore carburetors. |
| Banjo Fitting (with 3/8" inlet, 5/8"-20) |
#8089 |
| -6 AN Fitting (5/8"-20) |
#8087 |
| Inverted Flare Fitting (for 3/8" tubing, 5/8"-20) |
#8090 |
| Throttle Cable Plate with Morse Cable Bracket |
#8197 |
| Idle Compensator KIt |
#8059 |
| Maintains correct idle speed when air conditioner is on. Includes 12-volt solenoid and mounting
bracket for all Edelbrock square-bore carburetors. |
| Quadrajet Adapter Plate |
#2696 |
| Adapter for mounting Edelbrock square-bore carbs to stock Quadrajet and Thermo-Quad manifolds. |
| Quadrajet Adapter and Fuel Line Kit |
#2697 |
| All necessary hardware to add an Edelbrock square-bore carb to a stock Q-jet or Thermo-Quad manifold. |
|
| |
|
| |
Metering Jets
These metering jets are designed for use with Edelbrock Performer Series and Thunder Series AVS
carburetors only. Do not use with other brands. Sold in pairs.
|
|
| |
| .077 |
#1420* |
| .080 |
#1421* |
| .083 |
#1422* |
| .086 |
#1423* |
| .089 |
#1424* |
| .092 |
#1425* |
|
| .095 |
#1426* |
| .098 |
#1427* |
| .100 |
#1428* |
| .101 |
#1429* |
| .104 |
#1430* |
| .107 |
#1431* |
|
| .110 |
#1432* |
| .113 |
#1433* |
| .116 |
#1434* |
| .119 |
#1435* |
|
|
| |
|
| |
Metering Rods
These metering rods are designed for use with Edelbrock Performer Series and Thunder Series AVS
carburetors only. Do not use with other brands. Sold in pairs.
|
|
| |
Cruise/Power
| .057 x .049 |
#1437* |
| .058 x .052 |
#1438* |
| .060 x .052 |
#1439* |
| .060 x .057 |
#1440* |
| .062 x .052 |
#1441* |
| .063 x .037 |
#1442* |
| .063 x .047 |
#1443* |
| .065 x .037 |
#1444* |
| .065 x .042 |
#1416* |
| .065 x .047 |
#1445* |
| .065 x .052 |
#1460* |
|
Cruise/Power
| .065 x .057 |
#1461* |
| .067 x .049 |
#1462* |
| .067 x .055 |
#1463* |
| .068 x .042 |
#1446* |
| .068 x .047 |
#1447* |
| .068 x .052 |
#1448* |
| .068 x .057 |
#1436* |
| .070 x .037 |
#1449* |
| .070 x .042 |
#1450* |
| .070 x .047 |
#1451* |
| .070 x .052 |
#1452* |
|
Cruise/Power
| .070 x .057 |
#1418* |
| .071 x .047 |
#1453* |
| .073 x .037 |
#1454* |
| .073 x .042 |
#1455* |
| .073 x .047 |
#1456* |
| .073 x .052 |
#1457* |
| .075 x .037 |
#1458* |
| .075 x .042 |
#1419* |
| .075 x .047 |
#1459* |
|
|
| |
|
| |
Progressive Throttle Linkage Kits
Designed for use with Edelbrock Dual-Quad manifolds. This linkage kit provides smooth throttle activation
using high-quality aluminum, stainless steel and brass parts with spherical rod ends. |
 |
| |
| Dual-Quad Progressive Linkage Kit |
#7094 |
|
| |
|
| |
Chrysler and Ford Throttle Lever Adapters
Throttle Lever Adapter #1481 fits 1966 and later Chryslers. #1483 is for Ford automatic transmission
equipped vehicles with cable operated throttle (except A.O.D.). Both accept cruise control. Use with
appropriate throttle cable plate when necessary. Available in gold iridited finish to match Edelbrock
Performer Series Carbs or black to match Edelbrock Thunder Series AVS Carbs. |
 |
| |
| RPM Dual-Quad Kit for Small-Block Chevy |
Gold Finish |
Black Finish |
| Chrysler Throttle Lever Adapter (1966 and later) |
#1481* |
#1843* |
| Ford Throttle Lever Adapter (1968 and later) |
#1483* |
#1844* |
|
| |
|
| |
Ford Throttle Cable Plate Kits
Repositions stock throttle cable bracket to align with Edelbrock carb throttle arm. Use with Edelbrock
Throttle Lever Adapter #1483 and stock throttle cable bracket. Designed for Fords with cable activated
throttle and automatic transmission kickdown rod. Available in gold iridited finish to match Edelbrock
Performer Series Carbs or black to match Edelbrock Thunder Series AVS Carbs. |
 |
| |
| RPM Dual-Quad Kit for Small-Block Chevy |
Gold Finish |
Black Finish |
| Ford 289-302 |
#1490* |
#1845* |
| Ford 351W |
#1491* |
#1846* |
| Ford 351M/400 |
#1493* |
#1847* |
| Ford 429-460 |
#1495* |
#1848* |
|
| |
|
| |
Carburetor Maintenance Kits
|  |
| |
| Float Kit (includes 2 floats, 2 pins and a float setting gauge) |
#1469 |
| Accelerator Pump Assembly for #1400, #1403, #1404, #1405, #1406,
#1805, #1806, #1825, and #1826 |
#1470 |
| Accelerator Pump Assembly for #1407, and #1411 |
#1467* |
| Accelerator Pump Assembly for #1412, #1413, #1812, and #1813 |
#1468* |
| Marine Accelerator Pump (includes seal, spring and cup assembly for #1409/#1410) |
#1471* |
| Gasket Kit (includes airhorn and carb-to-manifold gasket) |
#1472 |
| Performer Series Linkage Kit (includes 1 ea. of 7 links and 6 retaining clips) |
#1473 |
| AVS Carb Linkage Kit (includes 1 ea. of 7 links with black finish and 6 retaining clips) |
#1873 |
| Carburetor Rebuild Kit (includes parts & gaskets to rebuild all Edelbrock square-bore carbs) |
#1477 |
| Replacement Fuel Inlet Fitting (5/8"-20, 3/8" nipple, gold iridited) |
#1497 |
| Replacement Needles and Seats (.0935" diameter, pair) |
#1498 |
| Airhorn Gasket (5 gaskets) |
#1499 |
| Airhorn Gasket (5 gaskets) |
#1499 |
| Carburetor Base Gasket (2 gaskets) |
#3899 |
| |
|
| |
|
| |
Air/Fuel Ratio Monitor
This Air/Fuel Monitor displays the actual air/fuel mixture in ratios from approximately 12 to 15:1. Use it to
guide carburetor adjustment and jetting or to improve ignition spark advance curves. Not for use with leaded
fuels or alcohol. Kit includes oxygen sensor, bung, harness, display unit and installation instructions. |
 |
| |
| Air/Fuel Ratio Monitor |
#6593 |
| Replacement Oxygen Sensor with Bung |
#3591 |
|
Performer Series
