Now available from Edelbrock, is a complete 416 c.i.d. supercharged, LS engine, that produces an astounding 720 horsepower and 695 ft-lbs. of torque, on 91 octane pump gas. The foundation of this engine is a brand new, GM aluminum LS3 block with a forged and balanced Manley crankshaft, forged Manley H-Beam connecting rods and Manley forged aluminum pistons. The 4.0" stroke, and 4.065" bore pushes this LS3 out to a whopping 416 c.i.d., for incredible low end torque. The 9.5:1 compression ratio allows for safe and reliable supercharged performance on 91 octane pump gas.
Helping this engine breathe is the Edelbrock E-Force LS3 supercharger system. This great looking system features Eaton TVS 2300 cc/rev rotors, which provide unparalleled efficiency, whisper quiet operation and OEM reliability. This engine package comes complete with essential supercharger kit components, such as the electric intercooler water pump, intercooler plumbing and intercooler recovery tank, as well as fuel rails, 60 lb/hr. fuel injectors, mass air flow sensor (MAFS) housing and re-usable air filter. The supercharger equipped on this engine features a driver's side throttle body orientation for ease of intake routing and a Corvette belt offset for a compact installation. (Other belt offsets and inlet orientations available upon request.) Pair with universal heat exchangers #15405 or #15406 for a complete installation.
Supercharged GM LS 416 Crate Engine Only The crate engine only package is the perfect swap for any off-road use vehicle already equipped with an LS3 engine. It includes an Edelbrock long block, E-Force supercharger and the core components shown above. This engine is ideal or for anyone looking to use or purchase their own accessories and electronics.
Application
Black
Without Water Pump
46730*
Supercharged GM LS 416 Crate Engine & Accessories This option includes all of the components in kit #46730 plus all of the front drive accessories, such as the alternator, water pump, power steering pump, idler pulleys, required brackets and hardware. This package utilizes the Corvette belt drive offset and measures from the crank center line: vertically, 15.5" high, driver's side is 17.5" wide, and passenger side is 13" wide.
Application
Black
With Water Pump
46740*
Supercharged GM LS 416 Crate Engine & Electronics This engine package includes all of the components in kit #46730 with the addition of a complete engine wiring harness, pre-programmed ECU, electronic throttle pedal, MAFS, throttle body, ignition coils and heated oxygen sensors. This engine is tuned and ready to run right-out-of-the-crate, making it ideal for any project vehicle desiring an LS3 high performance solution.
Application
Black
Without Water Pump
46750*
Supercharged GM LS 416 Crate Engine with Accessories & Electronics Finally, this package is our most complete solution. This option includes all of the components found in kits #46740 and #46750. It includes a complete engine, wiring harness, pre-programmed ECU, electronic throttle pedal, MAFS, heated oxygen sensors and accessories. This engine package is the ultimate turn key solution for any project vehicle demanding an LS3 engine!
Application
Black
With Water Pump
46760*
Important Note: Top of supercharger measures 21.54" from crank centerline (special order with lower profile, Corvette, lid for additional 2" of hood clearance.) Oil pan dimensions: 2.625" tall at the front, sump measures 6.75" (front) to 7.75" (rear) high and 7.75" in length. See our web site for reference dimensions.
Click here to view the web and mobile device friendly 2013 Crate Engine Brochure
This brochure is also print friendly and downloadable.
*Not legal for sale or use on pollution controlled motor vehicles.
Chevy (Small-Block)
Chevy (Big-Block)
