|
 |
Victor Max Wedge - 290cc
- Intake ports are machined to match Max Wedge intake manifolds for RB competition big-block Chryslers
- Intake ports are raised .650", exhaust ports are raised .250" for improved flow
- The intake flange is extended .950" to eliminate the need for intake spacer plates
- Exhaust flange is extended .300" from stock (same as Mopar Stage 6) featuring dry exhaust bolt holes with Helicoil® thread inserts
- Sold without springs or retainers; use recommended springs to match your cam
Cylinder Head Specifications |
| Combustion chamber volume |
75cc |
| Intake runner volume |
290cc (Raised .650") |
| Exhaust runner volume |
100cc (Raised .250") |
| Intake valve diameter |
2.20" |
| Exhaust valve diameter |
1.81" |
| Valve stem diameter |
11/32" |
| Valve guides |
Manganese bronze |
| Deck thickness |
|
| Valve spring diameter |
N/A |
| Valve spring maximum lift |
N/A |
| Rocker stud |
N/A |
| Guideplate |
N/A |
| Pushrod diameter |
3/8" |
| Valve angle |
15° |
| Exhaust port location |
Raised .250" |
| Spark plug fitment |
14mm x 3/4 reach, gasket seat |
| Made In |
USA |
|
|
Technical Notes: For headers, contact TTI (951) 371-4878. Offset intake rockers required, exhaust side accepts standard-spec rockers. May require additional pushrod hole clearancing for some combinations. Bare heads will have valve guides & seats installed, but will require final sizing and a valve job to match the valves you will be using. These heads require the use of a 14mm x 3/4" reach, flat gasket spark plug with a heat range appropriate to your application. |
| |
| Description |
Bare (Single) |
Complete (Single) |
| Victor Max Wedge |
77939* |
77949* |
| Valley cover for RB B/B Chrysler (413-440, 8.61" wide) |
N/A |
#7798 |
| Valley cover for B B/B Chrysler (383-400, 7.58" wide) |
N/A |
#7799 |
| NOTE: Complete head includes valves only; springs not included. Please consult your camshaft manufacturer for correct springs to match your camshaft and lifter combo. |
|
Flow Numbers as tested by Edelbrock's SuperFlo SF-1020 flow bench
| #77949 |
| Valve Lift |
.100" |
.200" |
.300" |
.400" |
.500" |
.600" |
.700" |
| Intake |
85 |
150 |
211 |
261 |
298 |
322 |
325 |
| Exhaust |
63 |
118 |
160 |
189 |
207 |
219 |
226 |
|
AMC
Small Block
