|
 |
Performer Ford
- 50-state street legal heads provide outstanding bolt-on performance for 1965-95 289, 302 and 351 Windsor V8s
- 1.90" intake valves are for use with stock pistons
- High-flow 2.02" intake valves are for use with pistons notched for valve clearance
Cylinder Head Specifications |
| Combustion chamber volume |
60cc |
| Intake runner volume |
170cc |
| Exhaust runner volume |
60cc |
| Intake valve diameter |
1.90" & 2.02" |
| Exhaust valve diameter |
1.60" |
| Valve stem diameter |
11/32" |
| Valve guides |
Manganese bronze |
| Deck thickness |
5/8" |
| Valve spring diameter |
1.46" |
| Valve spring maximum lift |
.575" |
| Rocker stud |
3/8" |
| Guideplate |
Hardended steel |
| Pushrod diameter |
5/16" |
| Valve angle |
20° |
| Exhaust port location |
Stock |
| Spark plug fitment |
14mm x 3/4 reach, gasket seat |
| Made In |
USA |
|
|
Technical Notes: Hardened pushrods required, use Edelbrock #9632 (flat tappet only). Will not accept rail rockers. 289-302 V8s require Head Bolt Bushings #9680 and either Head Bolt Kit #8552 (7/16") or stock head bolts. Match with Edelbrock head gasket sets. Bare heads will have valve guides and seats installed, but will require final sizing & a valve job to match the valves you will be using. Recommended spark plugs are Champion RC12YC or equivalent 14mm x 3/4" reach with flat gasket seat. |
| |
| Description |
Bare |
Complete |
| Street legal Performer with 1.90" intake valves |
60319 |
60329 |
| Street legal Performer with 2.02" intake valves |
60349 |
60359 |
|
Flow Numbers as tested by Edelbrock's SuperFlo SF-1020 flow bench
| #60329 |
| Valve Lift |
.100" |
.200" |
.300" |
.400" |
.500" |
.600" |
.700" |
| Intake |
72 |
132 |
183 |
216 |
245 |
249 |
244 |
| Exhaust |
57 |
104 |
142 |
159 |
170 |
174 |
175 |
|
Flow Numbers as tested by Edelbrock's SuperFlo SF-1020 flow bench
| #60359 |
| Valve Lift |
.100" |
.200" |
.300" |
.400" |
.500" |
.600" |
.700" |
| Intake |
70 |
128 |
183 |
219 |
251 |
255 |
246 |
| Exhaust |
57 |
104 |
142 |
163 |
170 |
174 |
175 |
|