|
|
 |
| CYLINDER HEADS - Pro-Port™ Raw & Semi-Finished Heads - LS Series |
 |
|
Chevy LS Series Pro-Port Raw |
|
Chevy LS Series Pro-Port Raw
- Unported versions of race-winning Edelbrock Victor Series CNC heads for the professional cylinder head porter and engine builder
- Cast in USA at the state-of-the-art Edelbrock Foundry with extra-thick walls for custom CNC porting
- In most cases, seats and manganese-bronze valve guides are included, but not installed
- Please note: these heads cannot be used without professional head preparation
LS1 Gen III Chevy LS1 Pro-Port Raw (15° Valve Angle)
A bare, unported version of the our popular head that fits 1997 & later GM Gen III small-block engines from 4.8L to 6.0L.
Victor Jr. LS Pro-Port Raw
These heads provide head porters with the extra material needed in the ports and combustion chamber for greater flexibility when developing CNC port programs, allowing engine builders to take full advantage of GM's LS series potential.
Both LS3 and LS7 versions retain the stock valve location, valve angle, intake flange and accessory bolts locations. They feature a 5/8" deck and come with seats and guides installed. LS3 Pro-Port heads are 3/4" taller than stock and have raised spring pads requiring longer valves. Victor Jr. LS3 Pro-Port cylinder head #77339 and Victor Jr. LS7 Pro-Port cylinder head #77369 are machined to work with standard GM LS blocks.
Victor Jr. LS3 Pro-Port #77349 and Victor Jr. LS7 Pro-Port cylinder head #77379 have the extra head bolt provisions required for use with GM LSX blocks.
|
 |
| * Click on part number to see image |
LS SERIES SERIES: PRO-PORT RAW
|
| Description |
Chamber
Size (A) |
Part# |
HIP'd |
Angle |
Intake
Port Entry |
Exhaust
Port Exit |
Valve Sizes (B)
Intake | Exhaust |
Valve Pierce Points (X,Y) (C)
Intake | Exhaust |
Valve Spacing |
Valve Seats |
Valve Guides |
| LS1 Gen III |
38cc |
61989* |
No |
15° |
0.82" x 2.80" |
1.41" x 1.02" |
2.08" / 1.64" |
(0.820", 0.010") (1.090", 0.010") |
1.910" |
Included |
Included |
| LS1 Gen III |
38cc |
619869* |
Yes |
15° |
0.82" x 2.80" |
1.41" x 1.02" |
2.08" / 1.64" |
(0.820", 0.010") (1.090", 0.010") |
1.910" |
Included |
Included |
| LS1 Gen III |
38cc |
61999* |
No |
15° |
0.82" x 2.80" |
1.41" x 1.02" |
2.08" / 1.64" |
(0.820", 0.010") (1.090", 0.010") |
1.910" |
Included |
Included |
| Victor LS3 |
N/A |
77339* |
No |
N/A |
N/A |
N/A |
N/A |
N/A |
N/A |
N/A |
N/A |
| Victor Jr. LS3-LSX |
N/A |
77349* |
No |
N/A |
N/A |
N/A |
N/A |
N/A |
N/A |
N/A |
N/A |
| Victor LS7 |
N/A |
77369* |
No |
N/A |
N/A |
N/A |
N/A |
N/A |
N/A |
N/A |
N/A |
| Victor Jr. LS7-LSX |
N/A |
77379* |
No |
N/A |
N/A |
N/A |
N/A |
N/A |
N/A |
N/A |
N/A |
|
|
Victor LS-R Series Head:
This head is designed to maximize the potential of GM's race oriented LSX block. It is also compatible with all previous versions of the engine. The true canted valve design offers the utmost in port flow and combustion efficiency possible with a two valve design. The head uses the GM SB2 valve cover footprint required by the added width of the canted valve layout. The stock exhaust bolt pattern is retained. Like all Edelbrock Pro-Port Raw heads, they will require professional preparation, including CNC porting to the port design of choice. Valve guides are included but not installed. This head has been HIP processed to increase density and provide the heads with extreme durability. |
 |
| * Click on part number to see image |
LS SERIES: PRO-PORT RAW
|
| Description |
Chamber
Size (A) |
Part# |
HIP'd |
Angle |
Intake
Port Entry |
Exhaust
Port Exit |
Valve Sizes (B)
Intake | Exhaust |
Valve Pierce Points (X,Y) (C)
Intake | Exhaust |
Valve Spacing |
Valve Seats |
Valve Guides |
| LS-R |
25cc |
770469* |
Yes |
8.7°x3.2° |
1.32" x 1.97" |
1.55" x 1.30" |
2.25" / 1.68" |
(0.652", -0.448") (1.178", 0.238") |
N/A |
None |
Included |
|
|
 |
|
AMC
NHRA Accepted Heads
Small Block Chevy
