|
Small-Block Ford Applications |
 |
| These unported versions of race-winning Edelbrock Victor Series CNC heads are designed specifically for the professional cylinder head porter and engine builder. Like all other Edelbrock Cylinder heads, Pro-Port units are also casted in the USA at the state-of-the-art Edelbrock Foundry with extra-thick walls to allow for custom CNC porting. In most cases, seats and manganese-bronze valve guides are included, yet not installed. |
 |
| * Click on part number to see image |
SMALL-BLOCK FORD SERIES: PRO-PORT RAW
|
| Description |
Chamber
Size (A) |
Part# |
HIP'd |
Angle |
Intake
Port Entry |
Exhaust
Port Exit |
Valve Sizes (B)
Intake | Exhaust |
Valve Pierce Points (X,Y)
Intake | Exhaust |
Valve Spacing |
Valve Seats |
Valve Guides |
| Victor |
28cc |
77309* |
No |
18° |
0.73" x 1.59" |
1.03" x 1.15" |
2.10" / 1.64" |
(0.860", -0.016") (1.040", -0.016") |
1.900" |
Included |
Included |
| Victor |
36cc |
770869* |
Yes |
15° |
1.00" x 1.85" |
1.33" x 1.24" |
2.18" / 1.64" |
(1.130", 0.006") (0.805", 0.006") |
1.935" |
Included |
Included |
| Glidden Victor |
36cc |
770969* |
Yes |
15° |
1.04" x 1.85" |
1.37" x 1.24" |
2.18" / 1.64" |
(0.710", 0.006") (1.190", 0.006") |
1.900" |
Included |
Included |
| Glidden Victor II |
24cc |
77319* |
No |
11.3° |
1.34" x 1.77" |
1.66" x 1.43" |
2.24" / 1.64" |
(0.760" 0.000") (1.170", 0.000") |
1.930" |
Included |
Included |
| Glidden Victor II |
24cc |
773169* |
Yes |
11.3° |
1.34" x 1.77" |
1.66" x 1.43" |
2.24" / 1.64" |
(0.760", 0.000") (1.170", 0.000") |
1.930" |
Included |
Included |
| Glidden Victor SC-1 |
20cc |
770769* |
Yes |
7.3°x0.3° |
1.16" x 1.76" |
1.50" x 1.36" |
2.24" / 1.64" |
(0.660", -0.440") (1.110", -0.350") |
N/A |
Included |
Included |
| |
| #770769 Important Notes: These heads can not be used without professional head preparation. With a true canted valve design (7.3° intake and 6.9° exhaust valve angles), these heads have maximum power potential. Extended intake flange and raised runners works with Yates-style manifolds. |
|
|
Valley Covers For Victor II or Victor SC-1 Pro-Port Raw heads |
 |
| Description |
Part No. |
| Valley Cover for Victor II or Victor SC-1 Pro-Port Raw heads on a 9.2" deck |
2832 |
| Valley Cover for Victor II or Victor SC-1 Pro-Port Raw heads on a 9.5" deck |
2833 |
|
|
Aluminum Valve Covers For Ford Boss / Cleveland with SC-1 Pro-Port Raw heads |
| Designed especially for the Edelbrock Glidden Victor SC-1 cylinder head #770769, this heavyduty sand cast aluminum valve cover will fit Edelbrock and factory Cleveland cylinder heads as well as other aftermarket heads that utilize a Cleveland bolt pattern. It has been designed to provide additional clearance to the Jesel rocker arm set-up when used on our Glidden Victor SC-1 Pro-Port Raw cylinder head. No provision for breather hole has been machined to allow for custom plumbing of the crankcase ventilation system. |
 |
| Description |
Part No. |
| Sand Cast Aluminum Valve Cover for Ford Boss/Cleveland with SC-1 Style Heads |
4267* |
|
|
 |
AMC
NHRA Accepted Heads
Small Block Chevy
