| Fuel Injector 60 lb/hr @ 43 psi; 85 lb/hr @ 87 psi, high impedance (set of 8) |
#3686 |
| Fuel Injector 60 lb/hr @ 43 psi; 85 lb/hr @ 87 psi, high impedance (1 only) |
#3687 |
Pico Fuel Injector 19 lb/hr @ 45 psi (1 only)
for #3501, #3502, #3505, #3506, #3562 & #3563 |
#3574 |
| Fuel Injector 27 lb/hr @ 50 psi (set of 8) for #3500 |
#3598 |
| Fuel Injector 27 lb/hr @ 50 psi (1 only) for #3500 |
#3585 |
Pico Fuel Injector 29 lb/hr @ 45 psi (set of 8) for #3503, #3507,
#3509, #3521, #3526, #3530, #3531, #3541, #3551, #3564 & #3565 |
#3853 |
Pico Fuel Injector 29 lb/hr @ 45 psi (1 only) for #3503, #3507,
#3509, #3521, #3526, #3530, #3531, #3541, #3551, #3564 & #3565 |
#3583 |
| Pico Fuel Injector 35 lb/hr @ 45 psi (set of 8) for #3508 |
#3636 |
| Pico Fuel Injector 35 lb/hr @ 45 psi (1 only) for #3508 |
#3635 |
| Pico Fuel Injector 44 lb/hr @ 45 psi (set of 8) for #3550 |
#3684 |
| Pico Fuel Injector 44 lb/hr @ 45 psi (1 only) for #3550 |
#3685 |
| ECM Computer |
#3570 |
| Calibration Module Cord & Adapter |
#3571 |
| Distributor Conversion Kit for the Pro-Flo #3500, #3503, #3507, #3550, and #3551 |
#3576 |
| Pump Relay |
#3586 |
| MAP Sensor |
#3587 |
| Air Temp Sensor (mounts in air cleaner baseplate) |
#3578 |
| Air Temp Sensor (3/8"-18 NPT thread) |
#3588 |
| Coolant Temp Sensor |
#3589 |
| Throttle Position Sensor |
#3590 |
| Oxygen Sensor & Bung |
#3591 |
| Fuel Pump |
#3594 |
| Fuel Filter |
#3596 |
| Fuel Pressure Regulator for #3500 |
#3597 |
| Fuel Pressure Regulator for #3503 & #3550 |
#3584 |
| Idle Air Solenoid |
#3599 |
| Hall Effects Sensor for the Pro-Flo #3500, #3503, #3507, #3550, and #3551 |
#3517 |
| Ignition Amplifier |
#3518 |
| Calibration Module |
#3519 |
| Gasket for 2V Air Valve on #3503 |
#3894 |
| Gasket for 4V Valve on all other Pro-Flo systems |
#3895 |
| Pro-Tuner EFI Distributor with Cam Sync for SBC & BBC |
#3615 |
| Fuel Rail Stands for PICO Injectors |
#3619 |
| Fuel & Oil Pressure Sensor (0-100 psi) |
#36011 |
| Coolant Temp Sensor (Delphi) also oil temp, 3/8"-18 NPT thread |
#36012 |
| Oxygen Sensor |
#36013 |
| AMP Power Reay 12 Volt for Pro-Tuner EFI Harness |
#36014 |
| Pro-Tuner EFI RS485 Communications Cable |
#36016 |
| Idle Air Motor and gasket |
#36017 |
| Throttle Position Sensor (clockwise rotation) |
#36018 |
| 1 BAR MAP Sensor |
#36019 |
| 2 BAR MAP Sensor with 1/8 -27 NPT |
#36020 |
| |
|
| |
Pro-Flo2 EFI
