|
|
 |
| EFI - Pro-Tuner EFI - Accessories |
 |
|
|
|
|
| |
| ALUMINUM FUEL RAILS & STANDS
CNC machined from aluminum extrusions, these fuel rails have a 9/16" i.d. fuel passage, a flow-through design and 3/8" pipe threads on both ends. All hardware is included. Bracket stands (included) match with standard injectors (2.650" O-ring spacing) or pico injectors (1.50" O-ring spacing) as indicated. |
| Application |
Part # |
| Small-block Chevy (for use with #29785 and standard injectors) |
#3630 |
| Small-block Chevy (for use with Vortec manifold #29135 and standard injectors) |
#3631 |
| Small-block Chevy LS1 (for use with #29085 and Bosch injectors) |
#3638 |
| Big-block Chevy (for use with #29025, #29045, #29165, #29275 and standard injectors) |
#3633 |
| Small-block Chrysler 340/360 (for use with #28155 and Bosch injectors) |
#3641 |
| Big-block Chrysler 413-440 (for use with #29545 and Bosch injectors) |
#3640 |
| Small-block Ford (for use with #29245 & #29285 and standard injectors) |
#3620 |
| Ford FE 390/428 (for use with #29365 & #29375 and standard injectors) |
#3632 |
| 4.6L Ford (for use with #28385 and standard injectors) |
#3639 |
| Pontiac (for use with #29565 & #29575 and standard or pico injectors) |
#3634 |
| Pontiac (for use with #50565 and pico injectors, see page 117) |
#3637 |
| Fuel Rail Stands for use with pico injectors (qty. 4) |
#3619 |
|
|
| |
| FUEL INJECTORS |
 
| Application |
Part # |
| Fuel Injector 60 lb/hr @ 43 psi; 85 lb/hr @ 87 psi, high impedance (set of 8) |
#3686 |
| Fuel Injector 60 lb/hr @ 43 psi; 85 lb/hr @ 87 psi, high impedance (1 only) |
#3687 |
Pico Fuel Injector 19 lb/hr @ 45 psi (1 only)
for #3501, #3502, #3505, #3506, #3562 & #3563 |
#3574 |
Pico Fuel Injector 29 lb/hr @ 45 psi (set of 8) for #3503, #3507,
#3509, #3521, #3526, #3530, #3531, #3541, #3551, #3564 & #3565 |
#3853 |
Pico Fuel Injector 29 lb/hr @ 45 psi (1 only) for #3503, #3507,
#3509, #3521, #3526, #3530, #3531, #3541, #3551, #3564 & #3565 |
#3583 |
| Pico Fuel Injector 35 lb/hr @ 45 psi (set of 8) for #3508 |
#3636 |
| Pico Fuel Injector 35 lb/hr @ 45 psi (1 only) for #3508 |
#3635 |
| Pico Fuel Injector 44 lb/hr @ 45 psi (set of 8) for #3550 |
#3684 |
| Pico Fuel Injector 44 lb/hr @ 45 psi (1 only) for #3550 |
#3685 |
|
|
| |
| SENSORS, IDLE MOTOR & ELECTRONICS |
 
| Application |
Part # |
| Throttle Position Sensor clockwise rotation |
#36018 |
| Coolant Temp Sensor (Delphi) also oil temp, 3/8"-18 NPT thread |
#36012 |
| Air Temp Sensor mounts in air cleaner baseplate |
#3578 |
| Air Temp Sensor 3/8"-18 NPT thread |
#3588 |
| MAP Sensor 1 Bar |
#36019 |
| MAP Sensor 2 Bar |
#36020 |
| Fuel & Oil Pressure Sensor (0-100 psi) |
#36011 |
| Oxygen Sensor |
#36013 |
| 30 AMP Harness Power Relay 12volt |
#36014 |
| GM Stepper IAC Motor |
#36015 |
| PWM Idle Air Motor and Gasket (Hitachi) |
#36017 |
| EFI RS 485 Communication Cable (Pro-Tuner) |
#36016 |
| USB to Serial Converter |
#91147 |
|
|
| |
| FUEL DELIVERY |
 
| Application |
Part # |
| Fuel Pump 57 gph @ 45 psi, 3/8" hose barb inlet/outlet |
#3594 |
| Fuel Pump 80 gph @ 45 psi, -10 AN inlet/outlet |
#1790 |
| Fuel Pump 120 gph @ 45 psi, -12 AN inlet/outlet |
#1794 |
| Fuel Pressure Regulator -6 AN inlet/outlet/bypass |
#1728 |
| Fuel Pressure Regulator -10 AN inlet/outlet -6 AN bypass |
#1729 |
| Fuel Pressure Regulator (Pro-Flo MPFI & TBI conversions #3501, #3502, #3505, #3506, #3562, #3563, #3564, & #3565) |
#3595 |
|
|
| |
| ECU PROTECTIVE COVERS |
 
| Application |
Part # |
| Cast Aluminum Cover for 48-pin ECU |
#3612 |
| Cast Aluminum Cover for 80-pin ECU |
#3613 |
|
|
|
|
| |
| PRO-TUNER EFI DISTRIBUTORS
These distributors are designed for use with the Victor and Super Victor Pro-Tuner EFI systems and are also compatible with other aftermarket EFI management systems. This distributor has a Magnetic Crank Pickup and uses a Hall-Effect Pickup with LED indicator for the Camshaft Sensor. The Cam Sync Pickup can be adjusted manually or with EFI Management software. The Cam Sync has a 12" lead with a 3-prong Weatherpak connector. The crank trigger has an 8" lead with a 2-prong Weatherpak connector. |
| Application |
Part # |
| Pro-Tuner EFI Distributor w/ Cam Sync (Pontiac) |
#3616 |
|
|
Pro-Flo2 EFI
