|
| |
1991-2003 Ford 4.6L and 5.4L
Designed and manufactured in the USA by Edelbrock, these high-quality cast aluminum throttle bodies feature a larger than stock throttle bore diameter for increased air-flow resulting in increased performance. Edelbrock throttle bodies are especially effective with other performance enhancing components such as a cold-air intake, camshaft, nitrous or any power adder. Every throttle body is cast in Edelbrock's ultra-modern aluminum foundry, precision CNC machined and meticulously assembled for a true bolt-on performance upgrade. A new throttle positioning sensor (TPS) is included and is pre-set for easy and accurate installation. Choose from 70mm or 75mm applications. Each model is CARB approved and is 50-State emissions legal. [E.O. # D-215-51]. Made in USA. |
 |
| |
| Application |
70mm |
75mm |
| 1996-2003 Ford Mustang with 4.6L SOHC 2V |
3871 |
3872* |
| 1991-1995 Ford/Lincoln/Mercury with 4.6L SOHC 2V |
3873 |
--- |
| 1997-2003 Ford/Lincoln/Mercury Trucks and SUVs applications with 4.6L/5.4L |
--- |
3874 |
|
 |
| |
Ford
1986-95 5.0L MUSTANGS
Street legal for late-model 5.0L Ford Mustangs. 65mm size is ideal for stock manifolds. 70mm is the
optimum choice for the Performer 5.0/Performer RPM 5.0 EFI intake and Total Power Package
(70mm gained 10 hp over stock throttle body). 75mm is intended for more radical engine combinations
and requires port matching to fit most manifolds. 1986-93 Throttle Bodies must be used with matching EGR
Plates. Gaskets are included. See Ford S/B Fuel Injection Manifolds for 5.0L intakes. |
 |
| |
| Application |
65mm |
70mm |
75mm |
| 1986-93 5.0L Mustang Throttle Body and EGR Plates |
3824 / 3827 |
3825 / 3828 |
3826 / 3829 |
| Replacement Gasket Sets |
3830 |
3830 |
3831 |
| 1994-95 5.0L Mustang** |
3844 |
3845 |
3846 |
| |
| **Throttle body only, use adapter #3835 (see Throttle Body Adaptors below). |
|
|
| |
Throttle Body Adapters
FOR 1994-95 MUSTANGS
These adapters are required to install Edelbrock 5.0L manifolds #3821/#7126 on 1994-95 Mustangs. They
must be used with Edelbrock or stock throttle body. The powder-coating is the same titanium gray used
on the Performer 5.0L and Performer RPM 5.0L manifolds for a matched set. #3821/#3 are stock
replacement and 50-state street legal for 1994-95 5.0L engines. Manifold will not clear stock strut tower
brace, Edelbrock Brace #5225 must be used. #8025 not required when using Edelbrock TES header #6745.
|
 |
| |
| Application |
Part # |
| 1994-95 Mustang Throttle Body Adapter for Edelbrock 5.0L manifolds #3821 & #7126 |
3835 |
| 1994-95 Mustang Throttle Body Adapter for Edelbrock 5.0L manifolds #3821 & #7126 (BLACK FINISH) |
38353 |
| 1994-95 Mustang EGR Supply Spacer for #7125 (use with #3835) |
8025 |
| Edelbrock Strut Tower Brace (see Strut Tower Braces) |
5225 |
|
|
| |
Upper Manifold Spacer Kits
FOR EDELBROCK 5.0L MANIFOLDS
Designed for Edelbrock Performer 5.0 #3821, Performer RPM 5.0 #7126 and Victor 5.0 #2945, these wood
fiber laminate spacers provide heat insulation between the upper and lower manifolds for a cooler charge
and more power. They also raise the upper manifold 1/2" for increased valve cover clearance. Kits include
everything you need for your 5.0L Ford.
|
 |
| |
| Application |
Part # |
| Spacer Kit for Edelbrock manifolds #3821 and #7126 |
8727 |
| Spacer Kit for Edelbrock manifold #2945 |
8728 |
| Spacer Kit for Edelbrock manifold #7123 |
8729 |
|
Pro-Flo2 EFI
