GASKETS - Applications - Valve Cover
 
VALVE COVER GASKETS
Fabricated from performance CRC (core-reinforced-composite), Edelbrock Valve Cover Gaskets provide excellent sealing integrity and conformability for easy installation. The multi-layer construction has two highly compressible, high rubber content, fiber-reinforced outside layers which are chemically bonded to a high strength composite core. This unique core-reinforced construction has a radial strength to resist high-vacuum or blow-out conditions.

AMC
Application Specs Part #
1967-69 290-390;
1970-91 290-304-343; 360-390-401
1/4" #7532

BUICK
Application Specs Part #
1967-76 400-455 #7546

CHEVROLET
Application Specs Part #
1958-1986 302-327-350 S/B 5/16" #7549
1958-1986 400 S/B 5/16" #7549
1958-1986 E-Tec 302-327-350 S/B 5/16" #7549
1958-1986 E-Tec 400 S/B 5/16" #7549
1958-1965 348/409 "W-Series" 5/16" #7582
1965-90 Rectangular Port Mark IV, 396-402-427-454 B/B 5/16" #7580
1965-90 Oval Port Mark IV, 396-402-427-454 B/B 5/16" #7580
1991 & later Rectangular Port Gen V & VI, 454-502 B/B 5/16" #7580
Edelbrock Big Victor 18° Spread-Port CNC Heads .130" #7559

CHRYLSER
Application Specs Part #
1966-87 318-340-360 5/16" #7592
1992 & Later Magnum 5/16" #7593
1958-1979, 361-383-400, 413-426 [except Hemi] and 440 engines 3/16" #7591

FORD
Application Specs Part #
1963-96 289-302 S/B [except Boss]; 1982-96 5.0L, 5.8L& 351W 5/16" #7560
302 E-Boss and 351W E-Boss [Clevor] Conversions 1/4" #7569
1970-74 351 Cleveland 1/4" #7569
1958-76 390-428 FE 5/16" #7568
1968-1987 429-460 B/B 5/16" #7563

OLDSMOBILE
Application Specs Part #
1965-76 400-425-455 1/4" #7598

PONTIAC
Application Specs Part #
1961-1980 326-389-421-428-455 3/16" #7590
 
(A) Does not include end seals; Edelbrock recommends the use of silicone sealant in place of end seals
(B) Must be used with OE-style valley pan
(C) Does not have embossed silicone bead
(D) Does not fit CJ or SCJ
(E) For use with Bowtie Vortec #2814 intake
(F) For use with large port applications, including Edelbrock RPM heads #60809/#60819, will not fit factory heads
(G) For use with large port applications only
(H) For use with Edelbrock RPM heads #61699 only
(I) For use with small port applications only
(J) Graphite style
(K) Gasket is trim-to-fit for port matching
Sign Up To Receive Our Newsletter & Members Only Specials  
Privacy Policy | Order A Catalog | Warranty Information| Site Map
©2009 Edelbrock Corporation