Carburetor Adapters
Carb adapters allow proper installation of carb-to-manifold. Number in parenthesis is thickness of adapter. |
 |
| |
| 4-bbl. Thermo-Quad Adapter (.750") |
#2691* |
| Mounts 4-bbl. Carter Thermo-Quad carburetors to square-bore, single-plane manifolds. |
| |
| 4-bbl. Quadrajet Adapter (.750") |
#2692* |
| Mounts 4-bbl. Rochester Quadrajet carburetors to square-bore, single-plane manifolds. |
| |
| Standard-Flange Sideways Adapters (pair, .550") |
#2694* |
| Mounts standard-flange Holley carbs sideways on Tunnel Rams. |
| |
| Four-hole, Square-bore to Spread-bore Adapter (.850") |
#2696 |
| Mounts Edelbrock square-bore carbs to stock Quadrajet & Thermo-Quad manifolds. |
| |
| Quadrajet and Thermo-Quad Adapter with Fuel Line Kit |
#2697 |
| All parts needed to install Edelbrock square-bore carb on stock Q-jet & T-Q intakes. Includes #2696. |
| |
| Standard-Flange Adapter (2.00") |
#8716* |
| Adapts 4500 Series manifold flange to 4150 Series standard-flange carburetor. |
| |
| Competition Q-Jet Adapter (.750") |
#2693* |
| Re-locates Q-Jet 5/16" to the rear for improved fuel distribution on square-bore single plane manifolds. |
|
| |
 |
| |
| Carburetor Adapter Plates |
 |
| |
| 1/16" Spread-bore Adapter Plate |
#2731* |
| Adapts spread-bore carbs to Edelbrock manifolds without regular mounting flange. |
| |
| Square-bore to Spread-bore Adapter Plate (1.16" thick, for Edelbrock manifolds only) |
#2732 |
| Mounts square-bore carbs to spread-bore carb pad on Edelbrock intakes (except #2101 & #3701). |
|
| |
 |
| |
4-Barrel Carburetor Spacers
Use open spacers where more plenum volume or more carb-to-plenum floor distance is required. 4-hole
spacers enhance low-rpm torque and throttle response and dampen reversion effects on the carb. The
superior heat insulating properties of wood fiber laminate are ideal for reducing heat transfer to the carb. |
 |
| |
| Open 1" Spacer, Black Phenolic Plastic |
#8710* |
| 4-hole 1" Spacer, Black Phenolic Plastic |
#8711* |
| Open 2" Spacer, Black Phenolic Plastic |
#8712* |
| 4-hole 2" Spacer, Black Phenolic Plastic |
#8713* |
| Performer Divided-Wall 1" Spacer, for Two-Plane Manifolds |
#8714* |
| Performer Divided-Wall 1/2" Spacer, for Two-Plane Manifolds |
#8715* |
| Open 1" Spacer for Holley 4500 Series |
#8717* |
| Open Cloverleaf 1" Spacer for Holley 4500 Series; fits 2937, 2965, 2956, 2970 & 2971 only |
#8718* |
| Open 3/4" Spacer, Wood Fiber Laminate |
#8719* |
| Open 1" Spacer, Wood Fiber Laminate |
#8720* |
| 1/2" Spacer, Wood Fiber Laminate (Includes dual bolt pattern for Edelbrock carbs on single and dual-quad manifolds. Will not fit universal #2101 style carb pads.) |
#8722 |
| 1/2" 4-Hole Spacer, Wood Fiber Laminate (Includes dual bolt pattern for Edelbrock carbs on single and dual-quad manifolds. Will not fit universal #2101 style carb pads.) |
#8723 |
| Open 1/2" Spacer, Wood Fiber Laminate |
#8724* |
| Divided 1/2" Spacer, Wood Fiber Laminate |
#8725* |
| 4-hole 3/4" Q-Jet Spacer, Wood Fiber Laminate; replacement for #1905 |
#8726 |
|
| |
 |
| |
Ford EGR Adapters and Plates
|
 |
| |
| EGR Adapter Kit — OEM 4V (#3896 included) |
#8017 |
| |
| 2V EGR Plate (1" tall) |
#8057 |
| |
| 4V EGR Plate (1" tall; except 429-460) |
#8053 |
| |
| Replacement EGR Gaskets — OEM 4V (for #3721, #3723, #3781, and #3783 manifolds) |
#3896 |
| |
| Replacement EGR Gasket — OEM 2V (for #3721, #3723, #3781, and #3783 manifolds) |
#3897 |
| |
| EGR Plate Gasket — OEM 4V (For #3766) |
#3898 |
|
| |
 |
| |
Spacer Kits For Edelbrock 5.0L/5.8L Intake Manifolds
These fiber laminate spacers for Edelbrock 5.0L/5.8L manifolds provide heat insulation between our upper
and lower manifolds for a cooler charge and more power. They also raise the upper manifold 1/2" for
increased valve cover clearance. Kits include everything you need for your 5.0L/5.8L. |
 |
| |
| Kit for Edelbrock manifolds #3821 and #7126 |
#8727 |
| |
| Kit for Edelbrock manifold #2945 & #3887 |
#8728 |
| |
| Kit for Edelbrock manifold #7123 |
#8729 |
|