Edelbrock Gaskets
Now, choosing the right gaskets is simple when it comes to Edelbrock. Just as our Power Packages are designed to work together, our gaskets are designed to make the Edelbrock Total Power Package complete.
Our Intake Gaskets are matched to Edelbrock Performer and Performer RPM cylinder heads and manifolds for optimum flow and performance, and sealing is improved with a silicone bead surrounding
each port opening. Edelbrock Head Gaskets feature a tough, scuff-resistant silicone rubber coating that provides excellent sealing and conformability, which is a real plus when it comes to sealing on new engines.
They don't require the engine to be warmed up in order to seal, and will release clean with no sticking if the engine needs to be disassembled. Edelbrock Head Gaskets will work with stock cast iron engines, iron
blocks with aluminum heads, or ultra high performance aluminum blocks and heads. Edelbrock Exhaust Gaskets are made of high-density non-asbestos fiber/metal reinforced composite material that is bonded to
a metal core. This gives them excellent sealing performance, load retention, chemical resistance and structural strength. At 5/16" thick, Edelbrock Valve Cover Gaskets are fabricated from performance CRC
(core-reinforced-composite), which is a multi-layer construction consisting of two highly compressible, high rubber content, fiber-reinforced outside layers, chemically bonded to a high strength composite core. This
unique core-reinforced construction provides excellent sealing integrity and conformability for easy installation as well as radial strength to resist high-vacuum or blow-out conditions. Edelbrock Cylinder
Head Gasket sets include everything you need to install Edelbrock aluminum heads; intake, exhaust, head, waterneck, distributor and valve cover gaskets. |
 |
| |
| In order to view the "Gasket Application Chart" you will need Acrobat Reader®. If you do not have this installed you can download it here (right).
The Gasket Application Chart are in PDF format in order to allow for the best possible viewing due to the layout and complexities of this particular section.
|
|
| |
 |
| |
Replacement Gaskets
CHEVY 2-PIECE MANIFOLD GASKETS |
|
| |
| Chevrolet 2.8L 2V V6 (1982-85) Top gasket for #3785/#3787 |
#6941 |
| Chevrolet 2.8L 4V V6 (1982-85) Top gasket for #3785/#3789 |
#6942 |
| Chevrolet S/B High-Flo T.P.I. (1985-91, 305/350) Gasket for runners #3865 & #3870 |
#3866 |
| Chevrolet S/B Tunnel Ram (1957-1985, 302-327-350-400) Base and top gasket for #7110 |
#6999 |
| Chevrolet S/B Tunnel Ram (1957-1985, 302-327-350-400) Set of 5 pairs |
#6950 |
| Chevrolet S/B Victor Tunnel Ram (pre-1987, 302-327-350-400) Top gasket for #7070 |
#6988 |
| Chevrolet B/B Street Tunnel Ram 2-0/2-R (396-502) Top gasket for #7115 & #7075 |
#6989 |
|
| |
|
| |
Replacement Gaskets
FORD 2-PIECE MANIFOLD GASKETS
|
|
| |
| Ford S/B Victor Jr. 2V Sportsman carb base gasket for #2940 (quantity of 6) |
#6940 |
| Ford S/B (1986-95, 5.0L) Base and plenum cover gaskets for #3821 |
#3832 |
| Ford S/B (1986-95, 5.0L) Base and plenum cover gaskets for #7126 |
#7231 |
| Ford S/B Victor (5.0L) Base and plenum cover gaskets for #2945 |
#7232 |
| Ford S/B (1987-96, 5.0L, 5.8L EFI trucks) Base and plenum cover gaskets for #3841and #3881 |
#3833 |
| Ford S/B Victor (5.8L EFI) Base and plenum cover gaskets for #3887 |
#7232 |
|
| |
|
| |
Replacement Gaskets
THROTTLE BODY GASKETS (for Edelbrock Throttle Bodies) |
|
| |
| Ford S/B (1986-95, 5.0L) For 65mm and 70mm throttle body |
#3830 |
| Ford S/B (1986-95, 5.0L) For 75mm throttle body |
#3831 |
|
| |
|
| |
Replacement Gaskets
FRONT COVER GASKET SETS (Includes front cover gasket and front seal) |
|
| |
| For S/B Chevy |
#6997 |
| For B/B Chevy |
#6998 |
| For S/B Ford |
#6991 |
|
| |
|
| |
Replacement Gaskets
CARBURETOR GASKETS (for Edelbrock Square-Bore Carbs) |
|
| |
| Gasket Kit (includes airhorn and carb-to-manifold gasket) |
#1472 |
| Airhorn Gasket (5 gaskets) |
#1499 |
| Carburetor Base Gasket (2 gaskets) |
#3899 |
|
| |
|
| |
Heat Insulator Gaskets
Designed to help prevent fuel percolation in Performer Series and Thunder Series AVS carburetors exposed
to extreme underhood temperatures. Use #9265 with open plenum manifolds such as Torker II and Victors.
#9266 features a divided center which is designed to seal the carburetor to dual-plane manifolds including
Performer, Performer RPM and most RPM Air-Gap manifolds. All gaskets come with extended carb studs. |
|
| |
| Open Square-Bore Heat Insulator Gasket (0.320" thick) |
#9265 |
| Divided Square-Bore Heat Insulator Gasket (0.320" thick) |
#9266 |
| Square-Bore Heat Insulator Gaskets for Edelbrock Dual-Quad manifolds (0.125" thick) |
#9267* |
|
| |
|
| |
Edelbrock Gasgacinch
Gasgacinch assures proper sealing of all gaskets used in a manifold installation. Also effective on water
pump, oil pan and valve cover gaskets. Water and oil resistant. Allows easy gasket removal during parts
disassembly. |
|
| |
| Edelbrock Gasgacinch (4.0 oz.) |
#9300 |
| |
|
Adapters & Spacers
