|
NUTS, PLUGS, PIPE FITTINGS, ETC. |
 |
| Description |
Part# |
| 1-3/4" Knurled Nut - black anodized for Elite Series Round Air Cleaners |
4209 |
| 1-1/4" Knurled Nut - black anodized for Elite Oval & Triangular Air Cleaners |
4219 |
| Carb Stud, Nut and Washer Kit - (5/16" x 1-1/2") |
8008 |
| Carb Stud, Nut and Washer Kit - (5/16"-18 x 1-3/4") |
8024 |
| #6 AN Fitting - for 2GC Carb, Q-Jets & Holley 4150/4160/4500 (7/8"-20) |
8081 |
| #6 AN Fitting - for Edelbrock square-bore & Carter AFB carbs (5/8"-20) |
8087 |
| Banjo Fitting - for Edelbrock square-bore & Carter AFB carbs (5/8"-20) |
8089 |
| Inverted Flare Fuel Line Fitting - for Edelbrock square-bore & AFB carbs (3/8") |
8090 |
| Socket Head Pipe Plug - 1/2" (1 only) |
9126 |
| Socket Head Pipe Plugs - 3/8" (1 pair) |
9127 |
| Socket Head Pipe Plugs - 1/4" (1 pair) |
9128 |
| Socket Head Pipe Plugs - 1/8" (1 pair) |
9129 |
| Oldsmobile Cast iron Exhaust Crossover Plugs |
2733 |
| Vacuum Fitting (low profile) for Holley Double-Pumper when used with #2101 & #5001 |
8096 |
|
 |
REPLACEMENT CHOKE PARTS FOR EDELBROCK MANIFOLDS |
 |
| Description |
Part# |
| Choke Block-Off Plate for #3771 - Ford 351-M/400 (supplied with manifold) |
8971 |
| Choke Block-Off Plate - Ford 351-W & 351-C (supplied with manifolds) |
8981 |
| Choke Adapter for #2101, #2104 & #3701 - Small-block Chevy (supplied with manifolds) |
8901 |
| Choke Adapter for #3711 & #2151 - Oldsmobile (supplied with manifolds) |
8951 |
| Choke Adapter for #2161 - Big-block Chevy (supplied with manifold) |
8961 |
|
|
DIVORCED CHOKE RODS FOR GM CARBS |
 |
| Description |
Part# |
| Automatic Divorced Choke Rod for #2101, #2104 & #3701 with Q-Jet carburetor |
9171 |
| Automatic Divorced Choke Rod for #7104 with Q-Jet carburetor |
9172 |
| Automatic Divorced Choke Rod for #7164 with Q-Jet carburetor |
9178 |
| Automatic Divorced Choke Rod for #2161 & #3761 with Q-Jet carburetor |
9179 |
|
|
THROTTLE BRACKETS AND HARDWARE |
 |
| Description |
Part# |
| Automatic Trans. Rod Extension Kit - for 1/4" Rod for Chrysler |
8003 |
| Automatic Trans. Rod Extension Kit - for 5/16" Rod for Chrysler |
8004 |
| Automatic Trans. Rod Extension Kit - for Ford |
8011 |
| Automatic Trans. Kickdown Lever Kit - Chevy (early Holley Double-Pumper) |
8020 |
| Automatic Trans. Kickdown Stud - 1968 & later TH350 |
8018 |
| Trans. Kick-Down Linkage Adapter Kit - 1977 Chrysler Vans |
8022 |
| Throttle & Automatic Trans. Shoulder Stud Kit - early Chrysler |
8007 |
| Throttle Cable Adapter - Chevy (1977 & later) |
8009 |
| Universal Throttle Rod Extension Kit - (7-1/2" long) |
8010 |
| Throttle or Automatic Trans. Cable Extension Kit - Chevy |
8012 |
| Throttle Bracket for #2156 & #5056 - Pontiac (1972-76, supplied w/manifolds) |
8014 |
| Throttle Bracket - Pontiac (1968-71) |
8015 |
| Ball End Stud - Holley Carbs |
8016 |
| Throttle Bracket - for Performer 454 T.B.I. #3764 (1987-90) |
8019 |
| Throttle Return Kit - Universal |
8005 |
| AMC Throttle Cable Adapter - 1979 and later |
8034 |
| Throttle & Automatic Trans. Kickdown Lever Kit - for Chrysler (early Holley Double-Pumper) |
8021 |
| LS1 Throttle and Trans Bracket (for carbureted applications) |
8029 |
| Throttle, Cruise Control & Trans. Kick-Down Mounting BracketChrome plated - Small-block Chevy (1978 & earlier with TH350, 200R4, or 700R4 trans.) |
8030 |
| Throttle, Cruise Control & Trans. Kick-Down Mounting Bracket Cad. plated gold - Small-block Chevy (1978 & earlier with TH350, 200R4, or 700R4 trans.) |
8036 |
| Throttle Solenoid and Bracket - for all Edelbrock Square-Bore carbs |
8059 |
| Throttle Rod Shoulder Stud - Chevy |
9141 |
| Universal Throttle Bracket for Small-block and Big-block Chevys |
8031 |
| Universal Throttle Bracket for Small-block Chevy Vortec |
8032 |
| |
| Black powder coated and adjustable to fit both EFI and standard intake manifolds. Part #8032 is uniquely designed for maximum adjustability on any S/B Chevy Vortec style manifold. |
|
|
INTAKE MANIFOLD BOLT KITS
Designed specifically for Edelbrock manifolds, these bolt kits feature reduced hex heads for easy wrench access. Features include cadmium finished steel bolt and hardened washers. |
 |
| Description |
Part# |
| AMC 290-401 c.i.d. |
8534 |
| Chevy 262-400 c.i.d. (1986 & earlier only) |
8504 |
| Chevy 262-400 c.i.d. with Edelbrock E-Tec or Chevrolet Vortec heads |
8516 |
| Chevy 348-409 c.i.d. |
8509 |
| Chevy 396-502 c.i.d. |
8564 |
| Chrysler 318-360 c.i.d. |
8579 |
| Chrysler 383-400-440 c.i.d. |
8594 |
| Chrysler 5.7 & 6.1L Late Model HEMI Engines |
8528 |
| Ford 260-302 c.i.d. |
8524 |
| Ford, Perf. RPM E-Boss 302 and E-Boss 351 |
8529 |
| Ford 351W c.i.d. |
8584 |
| Ford 351M/400 c.i.d. |
8574 |
| Ford 351C c.i.d. (#7564 only) |
8565 |
| Ford 360-390 c.i.d. (#2105 only) |
8508 |
| Ford FE (#7105 only) |
8507 |
| Ford FE (#2936 and #2937 only) |
8536 |
| Ford 429-460 c.i.d. |
8569 |
| Oldsmobile 330-403 c.i.d. (#2711 and #3711 only) |
8514 |
| Pontiac 326-455 c.i.d. |
8559 |
|
|
A/B Epoxy
Easy to use A/B epoxy is a two part epoxy that is great for cylinder head and intake modifications. Simply mix the two parts, apply and let cure. Once cured, it can be sanded to shaoem drilled and tapped. Wash hands well after handling. |
 |
| Description |
Part# |
| 1 Pound tube of A/B Epoxy |
9290 |
|
|
High Temp Silicon Sealant
This high quality RTV silicone is for use with intake manifold installations. This oil resistant sealant is fastcuring, sensor-safe, low-odor, non-corrosive and meets performance specs of OE silicone gaskets. It also retains high flexibility to prevent leaks and seepage caused by vibration and thermal expansion. |
 |
| Description |
Part# |
| RTV Silicone Sealant (1/2 oz.) |
1077 |
| RTV Silicone Sealant (3 oz.) |
1076 |
|
