|
 |
| Back to Buick Main Manifold Page |
|
 |
Buick/Rover 215 V8
PERFORMER ROVER (idle-5500 rpm)
Designed for Rover 3500cc V8s (1968 & later) and 1961-63 Buick and Oldsmobile aluminum
215 V8s. Manifold not equipped with EGR. Will not work with OEM carburetors (except Carter AVS). |
 |
| Applications |
Part # |
| Performer Rover (non-EGR) |
#2198* |
| |
| Carburetor Recommendations:
Edelbrock Performer Series carb, 500 cfm (see Carbs & Accessories)
 Installation Notes: Recommended intake gasket: Fel-Pro #MS96002. Manifold height: A-5.00", B-5.92" (measured to engine block) see A/B Measurements. Port exit dimensions: .88" x 1.54". Throttle Bracket #8031 or
#8036 will fit and accepts GM style throttle, kickdown and cruise control cables.
|
| |
|
 |
Buick 400-455 V8
PERFORMER BUICK 455 (idle-5500 rpm)
Designed for street 400-430-455 c.i.d. Buick V8s. #2146 is stock replacement/street legal
part for 400, 430 and 455 V8s; 1967-71; except stock equipped EGR. Manifold not equipped
with EGR. Will fit cold air induction hoods. Will not fit Buick 350. |
 |
| Applications |
Part # |
| Performer Buick 455 (non-EGR) |
#2146 |
| |
| Carburetor Recommendations:
OEM 4-bbl. Edelbrock Thunder Series AVS or Performer Series carb, 650-800 cfm (see Carbs & Accessories)
Installation Notes: Recommended intake gaskets: for 1967-76, Edelbrock #7246 or Fel-Pro #MS96005; 1972-76, Fel-Pro #MS96014. #2146 accepts divorced choke-type Quadrajet only. Manifold height: A-3.80", B-4.75" see A/B Measurements. Port exit dimensions: 1.14" x 2.26". |
| |
|
|
Buick 400-455 V8
BUICK B-4B (idle-5500 rpm)
Back by popular demand, #2515 is a resurrection of the popular B-4B manifold
made in the late 1960s for street 400-430-455 c.i.d. Buick V8s. The only change to the
original design is the addition of our proven Performer-style carb pad that accepts either square-bore or
spread-bore carbs, making this manifold an excellent choice for both restoration and performance-minded
Buick fans. |
 |
| Applications |
Part # |
| Buick B-4B Manifold (non-EGR) |
#2515 |
| |
| Carburetor Recommendations:
OEM 4-bbl. Edelbrock Thunder Series AVS or Performer Series carb, 650-800 cfm (see Carbs & Accessories)
Installation Notes: Recommended intake gaskets: for 1967-76, Edelbrock #7246 or Fel-Pro #MS96005; 1972-76, Fel-Pro #MS96014. Manifold height: A-3.80", B-4.75" see A/B Measurements. Port exit dimensions: 1.14" x 2.26". |
| |
|
Nascar Edition
