Chevrolet 262-400 Small-Block V8 PERFORMER AIR-GAP (idle-5500 rpm)
Designed for 1955-86 262-400 c.i.d. small-block Chevys, the Performer Air-Gap features the
air-gap design for the ultimate street performance in the idle to 5500 rpm range. This design
features an open air space that separates the runners from the hot engine oil resulting in a cooler, denser
charge for more power. High-velocity runners deliver excellent throttle response throughout the power band.
The great looks of the Performer Air-Gap along with the solid idle to 5500 rpm performance makes this an
ideal choice for street rods and street machines. Performer Air-Gap #2604 is for 1987-95 cast iron heads
with canted center bolt holes. No provision for exhaust heated chokes or exhaust crossover. Fits spread-bore
or square-bore carburetors. Will not fit under stock Corvette hood. Available with standard finish, polished or EnduraShine finish.
Applications
Part #
Performer Air-Gap (non-EGR)
#2601*
Polished Performer Air-Gap (non-EGR)
#26011*
Performer Air-Gap (non-EGR) w/ EnduraShine finish
#26014*
Performer Air-Gap for 1987-95 cast iron heads (non-EGR)
#2604*
Carburetor Recommendations:
Edelbrock Thunder Series AVS or Performer Series carb, 500-650 cfm (see Carbs & Accessories),
use bracket #8031 or #8036 for 1972-78
Installation Notes: Recommended intake gasket: Edelbrock #7201 (#2601); GM #10159409 (#2604).
Manifold height: A-3.72", B-4.92" (.27" taller than #2101) see A/B Measurements. Port exit dimensions: 1.14" x 1.88".
AMC
Installation Notes: Recommended intake gasket: Edelbrock #7201 (#2601); GM #10159409 (#2604).
Manifold height: A-3.72", B-4.92" (.27" taller than #2101) see 