|
 |
| Back to Chevy Main Manifold Page |
|
 |
Chevrolet 262-400 Small-Block V8
PERFORMER RPM (1500-6500 rpm)
Designed for 1955-86 262-400 c.i.d. Chevy V8s for maximum power and a broad torque curve
for high-performance street/marine. Provides power like a single-plane and throttle response like
a dual-plane. Has provisions to add oil fill tube. No provisions for exhaust heated or stock-style choke.
Accepts late-model waterneck, air-conditioning, alternator and H.E.I. Will fit cast iron Chevrolet Bowtie heads,
but will not fit 1987 and later cast iron heads. Will not fit under stock Corvette hood. Available with standard
finish, polished or EnduraShine finish, see Optional Finishes.
|
|
| Applications |
Part # |
| Performer RPM (non-EGR) |
#7101* |
| Performer RPM W/ Black Powder Coated Finish (non-EGR) |
#71013* |
| Polished Performer RPM (non-EGR) |
#71011* |
| Performer RPM with EnduraShine Finish (non-EGR) |
#71014* |
| |
| Carburetor Recommendations:
Edelbrock Thunder Series AVS or Performer Series carb, 650-800 cfm (see Carbs & Accessories),
use bracket #8031 or #8036 for 1972-78
 Installation Notes: Use #8504 Edelbrock bolt kit. Recommended intake gasket: Edelbrock #7201. Manifold
height: A-4.20", B-5.25" (.70" taller than #2101) see A/B Measurements. Port exit dimensions: 1.16" x 1.92".
|
|
|
Chevrolet 262-400 Small-Block V8
PERFORMER RPM Q-JET (1500-6500 rpm)
Designed for 1955-86 262-400 c.i.d. Chevy V8s for spread-bore (Q-Jet) or square-bore carbs.
Delivers maximum power and a broad torque curve for high-performance street. Carb pad will
accept square-bore carbs without adapters. Performer RPM Q-Jet has same provisions as #7101 (see above).
Will not fit under stock Corvette hood.
|
 |
| |
| Applications |
Part # |
| Performer RPM Q-Jet (non-EGR) |
#7104* |
| Performer RPM Q-Jet Marine Applications (non-EGR) |
#2504* |
| |
| Carburetor Recommendations:
Edelbrock Thunder Series AVS or Performer Series carb, 650-800 cfm (see Carbs & Accessories),
use bracket #8031 or #8036 for 1972-78
Installation Notes: Recommended intake gasket: Edelbrock #7201. Manifold height: A-4.20", B-5.25" see
A/B Measurements. Port exit dimensions: 1.16" x 1.92". Use rod #9172 for divorced choke. |
| |
|
|
|
Chevrolet 262-400 Small-Block V8
PERFORMER RPM VORTEC (1500-6500 rpm)
Based on the highly successful and powerful Edelbrock #7101, this single four-barrel intake is
designed for the street rod, marine and engine swap market utilizing 262-400 c.i.d. Chevy V8s
with 1996 and later Vortec (L31) cast iron or the Edelbrock E-Tec aluminum heads. An external water bypass
boss is machined into the front of the water crossover for use on 1996 and later Vortec production engines.
Manifold accepts square-bore carbs only. For street and marine engines operating from idle-5500 rpm, see
the Performer Vortec manifold. Will not fit under stock Corvette hood.
Available with standard finish or polished.
|
 |
| Applications |
Satin |
Black |
EnduraShine |
| Performer RPM Vortec (non-EGR) |
#7116* |
#71163* |
#71164* |
| Performer RPM Vortec Marine Application (non-EGR) |
#2516* |
- |
- |
| |
| Carburetor Recommendations:
Edelbrock Thunder Series AVS or Performer Series carb, 650-800 cfm (see Carbs & Accessories),
use bracket #8032 for 1972-78
Installation Notes: Recommended intake gasket: Edelbrock #7235 or GM #89017465.
Manifold height: A-4.20", B-5.25" see A/B Measurements. Port exit dimensions: 2.05" tall (odd shaped width).
Stock brackets will require modification to fit the upright manifold bolt holes. Use Edelbrock Vortec
throttle bracket #8032, see Throttle Brackets and Hardware. |
|
AMC
