|
|
 |
| Back to Chevy Main Manifold Page |
|
 |
Chevrolet 262-400 Small-Block V8
PERFORMER T.B.I. (idle-5500 rpm)
Designed for 1987-95 305/350 c.i.d. (5.0/5.7L) Chevy throttle body injected (T.B.I.) engines.
#3704 is a stock replacement/street legal part for 305/350 V8s with factory T.B.I.; 1987-95.
Accepts all OEM equipment and small-bore (1-11/16") throttle body injectors only. No chip changes or
computer mods required unless entire 5.7L Power Package (manifold, cam, heads) is used. Computer chip is
supplied free of charge with proof of purchase of manifold, cam and heads. Will not fit Caprice.
|
|
| Applications |
Part # |
| Performer T.B.I. (EGR) |
#3704 |
| |
| Injector Recommendations:
Use stock Throttle Body Injection unit
 Installation Notes: Recommended intake gasket: GM #10159409. Manifold height: A-3.70", B-5.10",
see A/B Measurements, .250" taller than stock. Port exit dimensions: 1.13" x 1.87".
|
| |
|
|
|
Chevrolet 396-502 V8
PERFORMER 454 T.B.I. (idle-5500 rpm)
The Performer 454 T.B.I. manifold delivers outstanding performance for the street with
complete emissions compatibility. With an Edelbrock manifold #3764, Edelbrock cam kit
#2162* and Tubular Exhaust System 0-60 times improved by 1.70 seconds. Add our Performer
High-Compression heads #60499 for even greater power gains. Performer #3764 is a stock
replacement/street legal part for 1987-90 Chevy/GMC trucks with Mark IV 454 c.i.d. throttle body injected
V8 engines. Accepts stock EGR in stock location.
Note: Performer-Plus cam #2162 is not legal for sale or use on pollution controlled motor vehicles.
|
 |
| Applications |
Part # |
| Performer 454 T.B.I. Mark IV (1987-90, EGR) |
#3764 |
| |
| Injector Recommendations:
Use stock Throttle Body Injection Unit.
Installation Notes: Recommended intake gasket: GM #10181398. Manifold height: A-4.30", B-6.45" same
as stock, see A/B Measurements. Port exit dimensions: 1.41" x 1.59". 1987-90 Chevy 454 trucks require Edelbrock GM
T.B.I. throttle bracket #8019. |
| |
|
|
|
Nascar Edition
