|
 |
| Back to Chevy Main Manifold Page |
|
 |
Chevrolet 90° V6
PERFORMER 90° V6 (idle-5500 rpm)
Designed for street 1985-95 200-229-262 c.i.d. (3.8 and 4.3L) Chevy V6s. Will not accept
stock automotive carbs or 262 T.B.I. unit. Dual bolt pattern waterneck fits both automotive and
marine applications. Produced 18 more horsepower than an older manifold design on 4.3L marine engine. |
|
| Applications |
Part # |
| Performer 90° V6 (non-EGR) |
#2111* |
| |
| Carburetor Recommendations:
Edelbrock Performer Series carb, 500 cfm (see Carbs & Accessories)
 Installation Notes: Recommended intake gasket: Edelbrock #7209 or Fel-Pro #1202. Manifold height: A-3.50", B-4.18" see
A/B Measurements. Port exit dimensions: .88 x 1.77".
|
|
|
Chevrolet 90° V6
PERFORMER VORTEC V6 (idle-5500 rpm)
Based on the powerful Edelbrock #2111, this dual-plane intake is designed for the engine
swap market utilizing 1985 & later Chevy 200-229-262 c.i.d. (3.8L and 4.3L) V6 engines with
Vortec heads. With this new manifold, rodders can take advantage of the higher flow available with the
Vortec head design. Performer Vortec V6 #2114 has provisions for external water bypass and may be used
on either Vortec blocks or 1995 and earlier blocks. Designed for use with Edelbrock Performer Series 500
cfm carbs, it accepts late model waterneck, alternator, HEI and air conditioning. |
 |
| Applications |
Part # |
| Performer Vortec V6 (non-EGR) |
2114* |
| |
| Carburetor Recommendations:
Edelbrock Performer Series carb, 500 cfm (see Carbs & Accessories)
Installation Notes: Recommended intake gasket: GM 12529196. Manifold height: A-3.50", B-4.18" see
A/B Measurements. Port exit dimensions: port exit is 2.05" tall with slanted side walls. |
| |
|
|
|
Chevrolet 90° V6
PERFORMER 4.3L T.B.I. V6 (idle-5500 rpm)
Designed for street 1987-94 Chevrolet 4.3L V6 with factory Throttle Body Injection. The Performer
4.3L intake manifold provides outstanding throttle response and torque increases from idle to 5500 rpm.
#3713 is a stock replacement/street legal part for 4.3L T.B.I. V6; 1987-94. A computer chip is available at no charge and is street legal for 4.3L trucks (E.O. #D-215-21). Return the postage paid card that comes with the manifold to receive the chip. Manifold and chip provides a 6/10s of a second gain from 10-70 mph. Accepts all factory accessories/hardware. Throttle body unit remains in stock location. Not for vehicles with flash memory computer. These are most 1994 and later 4.3L T.B.I. V6 equipped vehicles. Flash memory ECM is located underhood. Will not fit 1986-89 Astro/Safari Vans. Will fit 1990-95 Astro/Safari Vans. |
|
| Applications |
Part # |
| Performer 4.3L T.B.I. V6 (EGR) |
#3713 |
| |
|
Injector Recommendations: Use stock Throttle Body Injection unit.
Installation Notes: Recommended intake gasket: GM #10159423. Manifold height: A-3.93", B-5.15" see A/B Measurements. Port exit dimensions: 1.10" x 1.92". Will fit 1990-95 Astro/Safari Vans. |
|
|
Chevrolet 2.8L V6
PERFORMER 2V 60° V6 (idle-5500 rpm)
Designed for 1982-85 2.8L 60° V6 Chevy longitudinal-mount engines. #3785/#3787 are stock
replacement street legal parts for these engines with OEM 2-bbl. carb; 1982-85. For light duty
pick-ups, passenger cars and 1982-86 Jeep Cherokees with 2.8L. Features base and interchangeable tops. #3787 accepts stock 2-bbl. carb. Edelbrock Signature Series chrome valve covers #4488 are available for this engine. |
|
| Applications |
Part # |
| Performer 2V 60° V6 Base |
#3785 |
| Performer 2V 60° V6 Top (EGR) |
#3787 |
| Top Gasket (included with top) |
#6941 |
| |
| Carburetor Recommendations:
OEM 2-bbl.
Installation Notes: Recommended intake gasket: Fel-Pro #MS91022. Manifold height: A-4.37", B-5.45",
see A/B Measurements. Port exit dimensions: 1.00" x 1.28"/1.00" x 1.71". Linkage and bracketry come with top. When used on Jeep Cherokee, additional hood shimming is required for clearance. Hood shims available from Jeep dealers (part #J0680435). |
|
|
Chevrolet 2.8L V6
PERFORMER 4V 60° V6 (idle-6000 rpm)
Designed for 1982-85 2.8L 60° V6 Chevy longitudinal-mount engines used in light duty
pick-ups and cars. Design features one manifold base and two interchangeable tops. The
Performer 4V 60° V6 #3789 accepts std. flange 4-bbl. carbs.
Edelbrock Signature Series chrome valve covers
#4488 are available for this engine. |
|
| Applications |
Part # |
| Performer 4V 60° V6 Base |
#3785 |
| Performer 4V 60° V6 Top (non-EGR) |
#3789* |
| Top Gasket (included with top) |
#6942 |
| |
| Carburetor Recommendations:
Holley #0-8007 (390 cfm)
Installation Notes: Manifold height: A-4.90", B-5.95" see A/B Measurements. Port exit dimensions: 1.00" x
1.28"/1.00" x 1.71". Recommended intake gasket: Fel-Pro #1270 or #MS91022. Linkage and bracketry
come with top. With 4-bbl. carb #0-8007 and auto trans, a GM transmission cable #25515598 is required. |
| |
|
|
|
Nascar Edition
){kind=link}