|
|
 |
| MANIFOLDS - Chrysler - Performer - Big Block |
 |
|
|
| Back to Chrysler Main Manifold Page |
|
 |
Chrysler 361-400 V8
PERFORMER 383 (idle-5500 rpm)
Designed for street 361-383-400 c.i.d. Chrysler V8s that measure 7.75" across block. For
EGR, #2186 is stock replacement/street legal part for 400 V8s with OEM 4-bbl. carb.; 1972-78.
For non-EGR, #2186 is stock replacement/street legal part for 361-383-400 V8s with OEM 4-bbl. carb.;
1966-72 (1973 non-CA); except stock equipped EGR. May be used with OEM or aftermarket carbs. |
|
| Applications |
Part # |
| Performer 383 (EGR/non-EGR) |
#2186 |
| |
Carburetor Recommendations:
OEM 4-bbl.
Edelbrock Thunder Series AVS or Performer Series carb, 600-800 cfm (see Carbs & Accessories),
use our #1481 or #1843 Throttle/Transmission Lever Kit
 Installation Notes: Recommended intake gasket: #7225. Manifold height: A-3.65", B-4.35",
measured to engine block, see A/B Measurements. Port exit dimensions: 1.14" x 2.12".
|
| |
|
|
|
Chrysler 413-440 V8
PERFORMER 440 (idle-5500 rpm)
Designed for street 413-426-440 c.i.d. Chrysler V8s that measure 8.75" across block. For
EGR, #2191 is stock replacement/street legal part for 440 V8s with OEM 4-bbl. carb.; 1972-79.
For non-EGR, #2191 is stock replacement/street legal part for 413, 426 (Wedge), 440 V8s with OEM 4-bbl.
carb.; 1966-72 (1973 non-CA); except stock equipped EGR. Will not fit 1962-64 Max Wedge heads.
|
|
| Applications |
Part # |
| Performer 440 (EGR/non-EGR) |
#2191 |
| |
Carburetor Recommendations:
OEM 4-bbl.OEM 4-bbl.
Edelbrock Thunder Series AVS or Performer Series carb, 650-800 cfm (see Carbs & Accessories),
use our #1481 or #1843 Throttle/Transmission Lever Kit
Installation Notes: Recommended intake gasket: #7225. Manifold height: A-3.80", B-4.80",
measured to engine block, see A/B Measurements. Port exit dimensions: 1.12" x 2.14". May require different EGR
valve, see installation instructions. |
| |
|
|
|
|
AMC
