MANIFOLDS - Chrysler - Torker / Torker II - Big Block
Back to Chrysler Main Manifold Page
Chrysler 413-440 V8
TORKER II 440 (2500-6500 rpm)
Designed for street 413-426-440 c.i.d. Chrysler V8s. They measure 8.75" across block. Manifold not equipped with EGR. Will not fit 1962-64 Max Wedge heads.
Applications Part #
Torker II 440 (non-EGR) #5091*
 
Carburetor Recommendations: Edelbrock Thunder Series AVS or Performer Series carb, 750-800 cfm (see Carbs & Accessories), use our #1481 or #1843 Throttle/Transmission Lever Kit

Installation Notes: Recommended intake gasket: #7225. Manifold height: A-4.15", B-5.20", measured to engine block, see A/B Measurements. Port exit dimensions: 1.10" x 2.17".
 
Performer-RPM Camshaft Performer RPM Cylinder Heads
Roller Timing Set Valve Springs
Retainers Manifold Bolts
Valve Covers Water Pumps
Chrysler 361-400 V8
TORKER 383 (2500-6500 rpm)
Designed for 361-383-400 Chrysler V8s that measure 7.75" across block. Great for street high-performance engines operating between 2500 and 6500 rpm where low-end torque is not a requirement.
 
Applications Part #
Torker 383 (non-EGR) #3010*
 
Carburetor Recommendations: Edelbrock Thunder Series AVS or Performer Series carb, 650-800 cfm (see Carbs & Accessories), use our #1481 or #1843 Throttle/Transmission Lever Kit

Installation Notes: Recommended intake gasket: #7225. Manifold ht.: A-3.75", B-4.60" see A/B Measurements. Port exit dimensions: 1.10" x 2.16".
 
* Not legal for sale or use on pollution controlled motor vehicles.
Sign Up To Receive Our Newsletter & Members Only Specials  
Privacy Policy | Order A Catalog | Warranty Information