|
 |
| Back to Ford Main Manifold Page |
 |
 |
Ford 260-289-302 V8
F-28 DUAL-QUAD (1500-6500 rpm)
Designed for 289-302 c.i.d. Ford V8s. This manifold offers excellent performance as well as a
hot looking package. With two Edelbrock carbs in-line, progressive throttle linkage and braided
fuel line, this low-profile design allows adequate hood clearance and maintains great driveability. Chrome
oval air cleaner #1235 tops the package. Mounting bosses for throttle cable
brackets make the F-28 suitable for late-model applications. Carb center to carb center is 6-7/16".
Use Performer-Plus cam #2122 for low-end torque or Torker-Plus cam #5022 for top-end power. |
 |
| Applications |
Part # |
| F-28 Manifold (non-EGR) |
#5435* |
| |
| Carburetor Recommendations: Edelbrock Thunder Series AVS #1803 and #1804, 500 cfm or
Performer Series #1403 and #1404, 500 cfm.
Installation Notes: Recommended intake gasket: Edelbrock #7220. Manifold height: A-3.90", B-4.75"
see A/B Measurements. Port exit dimensions: 1.03" x 1.92".
|
| |
|
|
 |
Ford 260-289-302 V8
RPM AIR-GAP DUAL-QUAD (1500-6500 rpm)
Designed for 289-302 small-block Fords, these intakes are taller than the low-profile F-28 intake and offer performance improvements in the 1500-6500 rpm range. The large runners feature our unique Air-Gap design that separates the runners from the hot engine valley for a cooler, denser charge and more hp. Also available in complete manifold and carb kits. |
 |
| Applications |
Part # |
| RPM Air-Gap Dual-Quad Intake Manifold for Ford 289/302 (non-EGR) |
#7535 |
| RPM Air-Gap Dual-Quad Intake Manifold for Ford 289/302 with EnduraShine Finish (non-EGR) |
#75354 |
| |
| Carburetor Recommendations: Edelbrock Thunder Series AVS #1803 and #1804, 500 cfm or
Performer Series #1403 and #1404, 500 cfm.
Installation Notes: Recommended intake gasket: Edelbrock #7220. Manifold height: A-4.85", B-5.70"
see A/B Measurements. Carb pad height: 5.28". Port exit dimensions: 1.05" x 1.90".
|
| |
|
 |
Ford 351W V8
RPM AIR-GAP DUAL-QUAD (1500-6500 rpm)
Designed for 351W small-block Fords, these intakes are taller than the low-profile F-28 intake and offer performance improvements in the 1500-6500 rpm range. The large runners feature our unique Air-Gap design that separates the runners from the hot engine valley for a cooler, denser charge and more hp. Also available as a complete manifold and carb kit.
|  |
| Applications |
Part # |
| RPM Air-Gap Dual-Quad Intake Manifold for Ford 351W (non-EGR) |
#7585 |
| RPM Air-Gap Dual-Quad Intake Manifold for Ford 351W with EnduraShine Finish (non-EGR) |
#75854 |
| |
| Carburetor Recommendations: Edelbrock Thunder Series AVS #1803 and #1804, 500 cfm.
Installation Notes: Recommended intake gasket: Use 12-bolt intake gasket set Edelbrock #7220. For van installations use OEM Ford "van" intake gasket set. Manifold height: A-4.93", B-5.56" see A/B Measurements. Carb pad height: 4.32". Port exit dimensions: 1.05" x 1.89".
|
| |
|