|
|
 |
| MANIFOLDS - Ford - Performer RPM - 351C/351M/400M |
 |
|
|
| Back to Ford Main Manifold Page |
|
 |
Ford 260-289-302 V8 (For Cleveland Heads)
PERFORMER RPM E-BOSS 302 MANIFOLD
With the Performer RPM E-Boss 302 manifold #7129, you can build a mock Boss engine by using a standard 302 block and Performer RPM Cleveland cylinder heads #61689 or #61699. For high-performance street and competition, our dual-plane design makes outstanding power from 1500 to 6500 rpm. The Cleveland port layout and intake bolt hole pattern fit both 2V and 4V heads. Features include 8.2" deck height, Windsor end rails, water neck and distributor clearance plus front and rear water bosses. Match with an Edelbrock Performer or Thunder Series AVS carburetor. Will not fit OE Boss 302 engines.
Available with standard finish or polished, see Optional Finishes.
|
|
| Applications |
Part # |
| Performer RPM E-Boss 302 Ford manifold |
#7129 |
| |
| Carburetor Recommendations:
Edelbrock Thunder Series AVS or Performer Series carb, 600-800 cfm (see Carbs & Accessories)  Recommended intake gasket: Edelbrock #7265. Manifold height: A-4.42", B-5.70"; Carb pad height: 5.06". see A/B Measurements. Port exit dimensions: 1.42" x 2.07".
|
|
|
Ford 351W V8 (For Cleveland Heads)
PERFORMER RPM E-BOSS 351 (1500-6500 rpm)
Build a mock Boss 351 engine with a standard 351 block and Edelbrock Performer RPM Cleveland heads using the new Performer RPM E-Boss 351 manifold #7183. For both highperformancestreet and competition, the dual-plane design makes outstanding power from 1500 to 6500 rpm and the Cleveland port layout and intake bolt hole pattern fit both 2V and 4V heads. It features 9.5" deck height, Windsor end rails, water neck and distributor hole clearance, front and rear water bosses with a standard square bore carburetor pad. Edelbrock carbs will work with Ford automatic overdrive trans (AOD) when used with Lokar bracket SRK-4000, for more info call (865) 966-2269 or go to lokar.com.
Available with standard finish or polished, see Optional Finishes.
|
|
| Applications |
Part # |
| Performer RPM E-Boss 351 (non-EGR) |
#7183 |
| |
| Carburetor Recommendations:
Edelbrock Thunder Series AVS or Performer Series carb, 600-800 cfm (see Carbs & Accessories) Recommended intake gasket: Edelbrock #7265. Manifold height: A-4.42", B-5.70"; Carb pad height: 5.06". see A/B Measurements. Port exit dimensions: 1.42" x 2.07". |
|
|
AMC
