|
|
 |
| MANIFOLDS - Ford - Performer RPM - 5.0 |
 |
|
|
| Back to Ford Main Manifold Page |
|
 |
Ford Mustang 5.0L EFI V8
PERFORMER 5.0 RPM II (1500-6500 rpm)
The Performer 5.0 RPM II manifold for 1986-95 5.0L Mustangs has shown significant gains
in horsepower over existing designs in the 1500 to 6500 rpm range, and is ideally suited for
street and strip applications. This manifold consists of a V-shaped crossover with an increasing crosssectional
area, which passes over to eight large tapered runners. The upper manifold is powder-coated light
titanium gray. Our 70mm throttle body is recommended.1994-95 Mustangs require Throttle Body Adapter
#3835 and Adapter Kit #8025 (see Throttle Body Adapters)
with stock hood of 1994-95 Mustangs, aftermarket hood recommended. 50-state street legal for 1986-95
Ford Mustangs with 5.0L V8.
|
|
| Applications |
Part # |
| Performer RPM 5.0 II (Complete, Base and Upper, EGR) |
#7123 |
| Performer RPM 5.0 II with black powder-coated finish (Complete, Base and Upper, EGR) |
#71233 |
| Performer RPM 5.0 II (Gasket Kit) |
#7233 |
| Performer RPM 5.8 II (EGR, complete, base, and upper) |
#7185 |
| Performer RPM 5.8 II (Base manifold only) |
#7184 |
| |
 Installation Notes: Recommended intake gasket: Edelbrock #7220. Air valve location is 0.30" higher and
0.50" forward from stock. see A/B Measurements. Port exit dimensions: 1.16" x 2.0". Recommended cams: Ford SVO X-303 or Z-303. |
| |
|
|
|
THROTTLE BODY ADAPTERS
FOR 1994-95 MUSTANGS
These adapters are required to install Edelbrock 5.0L manifolds #3821/#7123 on 1994-95 Mustangs.
They must be used with Edelbrock 65mm, 70mm or stock throttle bodies. The powder-coating is the
same titanium gray used on the Performer 5.0L and Performer RPM II 5.0L manifolds for a matched set.
#3821/#3835 are stock replacement and 50-state street legal for 1994-95 5.0L engines. Manifold
will not clear stock strut tower brace, Edelbrock Brace #5225 must be used. #8025 is not required
when using Edelbrock TES header #67453.
|
 |
| Applications |
Part # |
| 1994-95 Mustang Throttle Body Adapter for Edelbrock 5.0L manifolds #3821 & #7126 |
#3835 |
| 1994-95 Mustang Throttle Body Adapter for Edelbrock 5.0L manifolds #3821 & #7126 (BLACK FINISH) |
#38353 |
| 1994-95 Mustang EGR Supply Spacer for #7123 (use with #3835) |
#8025 |
| Edelbrock Strut Tower Brace |
#5225 |
|
|
AMC
