Ford 332-428 V8 PERFORMER RPM FE (1500-6500 rpm)
Designed for high-performance street 390-406-410-427-428 c.i.d. Ford FE V8s with standard
390-428 c.i.d., 427 low/medium-rise or Edelbrock Performer RPM FE heads. The dual-plane
constant cross-sectional area design builds low and mid-range acceleration while optimized runner paths
make exceptional top-end hp. Has provision for adding the PCV or breather flange at rear. No exhaust
crossover passage.
Applications
Part #
Performer RPM FE (non-EGR)
#7105*
Performer RPM FE with EnduraShine finish (non-EGR)
#71054*
Carburetor Recommendations:
Edelbrock Thunder Series AVS or Performer Series carb, 650-800 cfm (see Carbs & Accessories),
for auto. trans. use our #1483 or #1844
Installation Notes: Recommended intake gasket: Edelbrock #7224 or Fel-Pro #1247. Manifold height.: A-4.89", B-6.04"; Carb pad height: 5.46" see A/B Measurements. Port exit dimensions: 1.16" x 1.97".
Ford 429/460 V8 PERFORMER RPM 460 (1500-6500 rpm)
Designed for high-performance street 429-460 Ford V8s with standard or Cobra-Jet cylinder
heads. Latest technology in dual-plane design results in excellent low- and mid-range torque
and outstanding horsepower on appropriately equipped engines. Will accept square-bore or spread-bore
carburetors. Will not fit 1988 and later models. Note: Early Cobra-Jets came with Quadrajets.
Applications
Part #
Performer RPM 460 (non-EGR)
#7166*
Carburetor Recommendations:
Edelbrock Thunder Series AVS or Performer Series carb, 650-800 cfm (see Carbs & Accessories),
for auto. trans. use our #1483 & #1495 or #1844 & #1848
Installation Notes: Recommended intake gasket: Edelbrock #7223, Fel-Pro #1230 or #1231. Manifold height: A-4.81", B-6.15"; Carb pad height: 5.48"
see A/B Measurements. Port exit dimensions: 1.76" x 2.06".
Nascar Edition
Installation Notes: Recommended intake gasket: Edelbrock #7224 or Fel-Pro #1247. Manifold height.: A-4.89", B-6.04"; Carb pad height: 5.46" see 
