|
|
 |
| Back to Ford Main Manifold Page |
|
 |
Ford 260-289-302 V8
PERFORMER 289 (idle-5500 rpm)
Designed for street 260-289-302 c.i.d. Ford V8s without EGR.
#2121 is stock replacement/street legal part for 289 and 302 V8s with OEM 4V carb.; 1966-72
(1973 non-CA); except stock equipped EGR. Will not fit Boss 302 or 255 c.i.d. V8s. Aftermarket 4-bbl carbs
are not compatible with Ford Auto Overdrive Transmission (AOD) unless used with Lokar bracket SRK-4000.
Available with standard finish, polished or new EnduraShine
finish for a look you've got to see to believe, see Optional Finishes.
|
|
| Applications |
Part # |
| Performer 289 (non-EGR) |
#2121 |
| Polished Performer 289 (non-EGR) |
#21211 |
| Performer 289 with EnduraShine Finish (non-EGR) |
#21214 |
| |
| Carburetor Recommendations:
Edelbrock Thunder Series AVS or Performer Series carb, 500-650 cfm (see Carbs & Accessories),
for auto. trans. use our #1483 & #1490 or #1844 & #1845
 Installation Notes: Recommended intake gasket: Edelbrock #7220. Manifold height.: A-3.50", B-4.75",
see A/B Measurements. Port exit dimensions: 1.09" x 1.84".
|
|
|
Ford 351 Windsor V8
PERFORMER 351-W (idle-5500 rpm)
Designed for street 351 c.i.d. Ford Windsor V8s. #2181 is stock replacement/street legal part
for 351-W V8s with OEM carburetor; 1969-72 (1973 non-CA); except stock equipped EGR.
Will not fit Boss 351. Aftermarket 4-bbl carbs are not compatible with Ford Auto Overdrive Transmission
(AOD) unless used with Lokar bracket SRK-4000, see note at the bottom of this page.
|
|
| Applications |
Part # |
| Performer 351-W (non-EGR) |
#2181 |
| Performer 351-W w/ Polished Finish (non-EGR) |
#21811 |
| |
| Carburetor Recommendations:
Edelbrock Thunder Series AVS or Performer Series carb, 600-650 cfm (see Carbs & Accessories),
for auto. trans. use our #1483 & #1491 or #1844 & #1846
Installation Notes: Use 12-bolt intake gasket set (Edelbrock #7220 recommended). Van installations use OEM
Ford "van" gasket set; will fit early 16-bolt head with Ford 16-bolt intake gasket set. Choke block-off cover
plate #8981 included. Manifold height: A-3.40", B-4.75" see A/B Measurements. Port exit dimensions: 1.10" x 1.80". |
| |
|
|
|
Ford 260-289-302 V8
PERFORMER 302 (idle-5500 rpm)
Designed for carbureted 302 c.i.d. Ford V8s with EGR. #3723 is stock replacement/street
legal part for 302 2V V8s; 1972-85. Comes with a 2V EGR plate allowing the use of the stock
2V carb and EGR valve. #3721 is stock replacement/street legal part for 302 4-V V8s; 1983-85. Replaces the
stock 4V EGR manifold using the stock 4V adapter. Both manifolds can be adapted for 4V use by using our
#8053 4V EGR plate and the OEM EGR valve and gasket. Our #8017 adapter kit and Ford #E4ZZ9A-589E
spacer may be substituted for our #8053 EGR plate (1983-85 H.O. Mustangs/Capris come with this Ford
spacer). For 4V off-highway non-EGR applications, use our #8714 spacer. Aftermarket 4-bbl carbs are not
compatible with Ford Auto Overdrive Transmission (AOD) unless used with Lokar bracket SRK-4000.
|
 |
| Applications |
Part # |
| Performer 302 4-V (EGR) |
#3721 |
| Performer 302 2-V (EGR) |
#3723 |
| |
Carburetor Recommendations:
#3721: OEM 4-bbl. use our #8011 (if necessary)
#3723: OEM 2-bbl. #3723 can be used for off-road applications with Edelbrock Thunder Series AVS or
Performer Series carb, 500-650 cfm (non-EGR, see Carbs & Accessories) use adapter #8714. For auto. trans. use
our #1483 & #1490 or #1844 & #1845
Installation Notes: Recommended intake gasket: Edelbrock #7220. #3721 includes gaskets & 4-bbl. plate
#8017 for sealing of OEM EGR plate & carb. Replacement EGR plate gaskets for #3723: #3896 & #3897.
Manifold height: #3721 A-3.13", B-4.31" (without EGR plates installed). #3723 A-4.00", B-5.19 (with EGR
plates installed), see A/B Measurements. Port exit dimensions: .90" x 1.90". |
| |
|
|
Ford 351 Windsor V8
PERFORMER 351-W EGR (idle-5500 rpm)
Designed for street Ford 351-Windsors with EGR. #3781 is stock replacement/street legal
part for 351-W 2V V8s; 1972-87 and works with either the OEM 2V carb or an aftermarket
EGR 4V carb for off-road by using Edelbrock #8053 4V EGR plate and compatible EGR valve and gasket.
#3783 is stock replacement/street legal part for 351-W 4V H.O. V8s; 1984-86. Performer 351-W #3783
includes provision for EFE valve on H.O. engines. Aftermarket 4-bbl carbs are not compatible with Ford Auto
Overdrive Transmission (AOD) unless used with Lokar bracket SRK-4000, see note below.
|
 |
| Applications |
Part # |
| Performer 351-W 2V (EGR, 4V off-road) |
#3781 |
| Performer 351-W 4V H.O., (EGR,1984-86) |
#3783 |
| |
Carburetor Recommendations:
#3781: OEM 2V carburetor
#3783: OEM 4V carburetor
Installation Notes: Use 12-bolt intake gasket set (Edelbrock #7220 recommended). For van installations
use OEM Ford "van" intake gasket set; will fit early 16-bolt head with Ford 16-bolt intake gasket set.
Replacement EGR plate gaskets: #3896 & #3897. Choke block-off cover plate #8981 comes with intake
manifolds. Manifold ht: A-4.00", B-5.12" (w/1" EGR adapter #8053), see A/B Measurements.
Port exit dimensions: .96" x 1.74". |
| |
|
|
|
Nascar Edition
){kind=link}
){kind=link}