|
|
 |
| Back to Ford Main Manifold Page |
|
 |
Ford Mustang 5.0L EFI V8
PERFORMER 5.0 (idle-5500 rpm)
Designed for 1986-95 Ford Mustangs with 5.0L V8, the
Performer 5.0 EFI aluminum intake manifold represents the standard for hot 5.0L performance.
The modular design incorporates modern air flow technology and CAD programming for maximum power
gains – up to 37 horsepower at 5500 rpm – with no loss of low speed torque. Stock replacement and
50-state street legal for 1986-95 5.0L engines, the features of the new Performer 5.0 EFI manifold include:
broad power range from idle to 5500 rpm; removable plenum cover that allows access to runners for
modification; and base manifold is CNC port matched to upper manifold for maximum performance. The
upper and plenum cover are powder-coated light titanium gray. The base is as-cast and not powder-coated.
Combining the new Performer 5.0 intake manifold with other Power Package parts gives you even more
power across the entire rpm range. 1994-95 Mustangs require
Throttle Body Adapter #3835 and
Strut Tower Brace #5225.
|
|
| Applications |
Part # |
| Performer 5.0 (EGR) |
#3821 |
| Performer 5.0 Upper Plenum Only (includes plenum cover) |
#3822 |
| Performer 5.0 Base Only |
#3820 |
| Performer 5.0 Plenum Cover Only (includes gasket) |
#7127 |
| Performer 5.0 Gasket Set (includes base-to-upper and plenum cover gaskets) |
#3832 |
| |
 Installation Notes: Recommended intake gasket: Edelbrock #7220. Air valve location same as stock.
Port exit dimensions: 1.02" x 1.85". |
|
|
Ford 5.0L EFI Truck V8
PERFORMER TRUCK 5.0 (idle-5500 rpm)
The Performer Truck 5.0 aluminum intake manifold fits 1987-96 Ford pick-up trucks with a
5.0L EFI V8. The modular design incorporates the latest air flow technology and computer aided design for
maximum torque gains in the mid-range where trucks need it most. Stock replacement and 50-state street
legal for 1987-96 5.0L engines, the features of the Performer Truck 5.0 EFI manifold include: broad power
range from idle to 5500 rpm; removable plenum cover that allows access to runners for modification;
base manifold is CNC port matched to upper manifold for maximum performance. This manifold
accepts all stock hardware. The upper and plenum cover are powder-coated light titanium gray.
The base is as-cast and not powder-coated. Use with stock or stock replacement twin throttle body.
|
 |
| Applications |
Part # |
| Performer 5.0 (EGR) |
#3841 |
| Performer Truck 5.0 Plenum Cover Only (includes gasket) |
#3883 |
| Performer Truck 5.0 Gasket Set (includes base-to-upper & plenum cover gaskets) |
#3833 |
| |
| Installation Notes: Recommended intake gasket: Edelbrock #7220. Port exit dimensions: 1.02" x 1.85". |
| |
|
|
|
THROTTLE BODY ADAPTERS
FOR 1994-95 MUSTANGS
These adapters are required to install Edelbrock 5.0L manifolds #3821/#7123 on 1994-95 Mustangs.
They must be used with Edelbrock 65mm, 70mm or stock throttle bodies. The powder-coating is the
same titanium gray used on the Performer 5.0L and Performer RPM II 5.0L manifolds for a matched set.
#3821/#3835 are stock replacement and 50-state street legal for 1994-95 5.0L engines. Manifold
will not clear stock strut tower brace, Edelbrock Brace #5225 must be used. #8025 is not required
when using Edelbrock TES header #67453.
|
 |
| Applications |
Part # |
| 1994-95 Mustang Throttle Body Adapter for Edelbrock 5.0L manifolds #3821 & #7126 |
#3835 |
| 1994-95 Mustang Throttle Body Adapter for Edelbrock 5.0L manifolds #3821 & #7126 (BLACK FINISH) |
#38353 |
| 1994-95 Mustang EGR Supply Spacer for #7123 (use with #3835) |
#8025 |
| Edelbrock Strut Tower Brace |
#5225 |
|
Nascar Edition
