|
|
 |
| MANIFOLDS - Ford - Performer - Big-Block |
 |
|
|
| Back to Ford Main Manifold Page |
|
 |
Ford 332-428 V8
PERFORMER 390 (idle-5500 rpm)
Designed for street 332-352-360-390-406-410-427-428 c.i.d. Ford V8s with medium- or
low-rise cylinder heads. #2105 is stock replacement/street legal part for 332, 352, 360, 390,
406, 410, 427 and 428 V8s with OEM 4V carb.; 1966-72 (1973 non-CA); except stock equipped EGR.
Manifold not equipped with EGR; will not accept stock Motorcraft spread-bore carburetor or fit heavy-duty
361 c.i.d. and 391 c.i.d. Ford truck V8s.
|
|
| Applications |
Part # |
| Performer 390 (non-EGR) |
#2105 |
| Performer 390 with Black Powder Coated Finish (non-EGR) |
#21053 |
| |
| Carburetor Recommendations:
Edelbrock Thunder Series AVS or Performer Series carb, 600-800 cfm (see Carbs & Accessories),
for auto. trans. use our #1483 or #1844
 Installation Notes: Recommended intake gasket: Edelbrock #7224 or Fel-Pro #1247. Manifold height: A-4.35", B-5.50" (same as stock); Carb pad height: 4.92" see A/B Measurements. Port exit dimensions: 1.06" x 1.75".
|
| |
|
|
|
Ford 429/460 V8
PERFORMER 460 (idle-5500 rpm)
Designed for street 429/460 c.i.d. Ford V8s. #2166 is stock replacement/street legal part for
429 & 460 V8s with OEM 4-bbl. carburetor with electric choke; 1968-72 (1973 non-CA); except
stock equipped EGR. #3766 is stock replacement/street legal part for 460 V8s with OEM 4V carburetor with
electric choke; 1979-87. Will not fit 429 Cobra-Jets or 1966-68 462 Lincolns and will not accept stock
spread-bore carb. Will not fit 1988 and later models. #3766 cannot use #8714 to block-off EGR. Must use
stock EGR plate.
|
|
| Applications |
Part # |
| Performer 460 (non-EGR) |
#2166 |
| Performer 460 with Black Powder Coated Finish (non-EGR) |
#21663 |
| Performer 460 (EGR) |
#3766 |
| |
Carburetor Recommendations:
#2166: Edelbrock Thunder Series AVS or Performer Series carb, 650-800 cfm (see Carbs & Accessories),
for auto. trans. use our #1483 & #1495 or #1844 & #1848
#3766: OEM square-bore carb
Installation Notes: Recommended intake gasket: Fel-Pro #MS96018. Replacement EGR plate gaskets: #3898. Manifold height: A-3.75", B-4.49" (same as stock); Carb pad height: 4.12" see A/B Measurements. Port exit dimensions: 1.65" x 1.96". |
| |
|
|
|
|
Nascar Edition
