|
|
 |
| MANIFOLDS - Ford - RPM Air-Gap - 289/302/351W |
 |
|
|
| Back to Ford Main Manifold Page |
|
 |
Ford 260-289-302 V8
RPM AIR-GAP 302 (1500-6500 rpm)
Designed for street 289-302 c.i.d. Ford V8s, the RPM Air-Gap incorporates the same race-winning
technology that's been used on our Victor Series competition intakes for years. The air-gap design features
an open air space that separates the runners from the hot engine oil resulting in a cooler, denser charge
for more power. Includes nitrous bosses. No provision for exhaust heated chokes and no exhaust crossover.
Aftermarket 4-bbl carbs are not compatible with Ford Auto Overdrive Transmission (AOD) unless used with
Lokar bracket SRK-4000, for more info call (865) 966-2269 or go to www.lokar.com. Available with standard finish or new EnduraShine finish for a look you've go to
see to belive, see Optional Finishes.
|
 |
| Applications |
Part # |
| RPM Air-Gap 302 (non-EGR) |
#7521* |
| RPM Air-Gap 302 with Black Powder Coated finish (non-EGR) |
#75213* |
| RPM Air-Gap 302 with EnduraShine finish (non-EGR) |
#75214* |
| |
| Carburetor Recommendations:
Edelbrock Thunder Series AVS or Performer Series carb, 600-800 cfm (see Carbs & Accessories),
for auto. trans. use our #1483 & #1490 or #1844 & #1845
 Installation Notes: Will not fit 255 c.i.d. V8. Recommended intake gasket: Edelbrock #7220.
Manifold Height: A-4.30", B-5.50" see A/B Measurements. Port exit dimensions: 1.04" x 1.85".
|
|
|
Ford 351 Windsor V8
RPM AIR-GAP 351W (1500-6500 rpm)
Designed for street and high performance 351-400+ c.i.d. 351-W Ford V8s, the RPM Air-Gap
incorporates the same race-winning design that's been used on our Victor Series competition
intakes for years. The air-gap design features an open air space that separates the runners from the hot
engine oil resulting in a cooler, denser charge for more power. Larger cross sectional area and a taller carb
flange than #7181 for compatibility with large displacement, stroker 351-W based engines. Includes nitrous
bosses. No provision for exhaust heated chokes and no exhaust crossover. Aftermarket 4-bbl carbs are not
compatible with Ford Auto Overdrive Transmission (AOD) unless used with Lokar bracket SRK-4000, see
note below.
|
 |
| Applications |
Part # |
| RPM Air-Gap 351W (non-EGR) |
#7581* |
| RPM Air-Gap 351W with EnduraShine finish (non-EGR) |
#75814* |
| |
| Carburetor Recommendations:
Edelbrock Thunder Series AVS or Performer Series carb, 650-800 cfm (see Carbs & Accessories),
for auto. trans. use our #1483 & #1491 or #1844 & #1846
Installation Notes: Use 12-bolt intake gasket set (Edelbrock #7220 recommended).
Manifold height: A-5.31", B-6.19" see A/B Measurements. Port exit dimensions: 1.07" x 1.88". |
| |
|
|
AMC
