MANIFOLDS - Ford - Torker / Torker II - 289/302/351W
Email Page To a Friend
Back to Ford Main Manifold Page

Ford 260-289-302 V8
TORKER II 302 (2500-6500 rpm)
Designed for street 289/302 c.i.d. Ford V8s. Will not fit Boss 302. Manifold not equipped with EGR. Will not fit 255 c.i.d. Ford V8 engines. Not for heavy vehicles. Aftermarket 4-bbl carbs are not compatible with Ford Auto Overdrive Transmission (AOD) unless used with Lokar bracket SRK-4000, see note at bottom of this page.
Applications Part #
Torker II 302 (non-EGR) #5021*
 
Carburetor Recommendations: Edelbrock Thunder Series AVS or Performer Series carb, 600-800 cfm (see Carbs & Accessories), for auto. trans. use our #1483 & #1490 or #1844 & #1845

Installation Notes: Will not fit 255 c.i.d. Ford V8. Recommended intake gasket: Edelbrock #7220. Manifold height: A-4.00", B-5.18" see A/B Measurements. Port exit dimensions: 1.03" x 1.93".
 
Performer-RPM Camshaft Performer RPM Cylinder Heads
Roller Timing Set Cam Gear Drive
Aluminum Front Cover Valve Springs
Retainers Manifold Bolts
Pushrods Valve Covers
Water Pumps  

Ford 351 Windsor V8
TORKER II 351-W (2500-6500 rpm)
Designed for 1969 and later 351 Windsor Ford V8 high-performance engines with Edelbrock heads, OEM 12- or 16-bolt heads or equivalent. Will not fit "Boss 351" Cleveland. Manifold not equipped with EGR. Aftermarket 4-bbl carbs are not compatible with Ford Auto Overdrive Transmission (AOD) unless used with Lokar bracket SRK-4000, see note at bottom of this page.
Applications Part #
Torker II 351-W (non-EGR) #5081*
 
Carburetor Recommendations: Edelbrock Thunder Series AVS or Performer Series carb, 600-800 cfm (see Carbs & Accessories), for auto. trans. use our #1483 & #1491 or #1844 & #1846

Installation Notes: Use 12-bolt intake gasket set (Edelbrock #7220 recommended). For van installations use OEM Ford "van" intake gasket set; will fit early 16-bolt head with Ford 16-bolt intake gasket set. 1" open carburetor spacer, our #8710, is recommended when hood clearance permits. Manifold height: A-3.55", B-4.75", same as stock, see A/B Measurements. Port exit dimensions: 1.02" x 1.82".
 
Torker-Plus Camshaft Performer RPM Cylinder Heads
Roller Timing Set Cam Gear Drive
Valve Springs Retainers
Manifold Bolts Performer RPM Fuel Pump
Valve Covers Aluminum Front Cover
Water Pumps  
  Note: Performer Series & Thunder Series AVS carbs will work with Ford automatic overdrive trans (AOD) when used with Lokar bracket SRK-4000, for more info call (865) 966-2269 or go to lokar.com
* Not legal for sale or use on pollution controlled motor vehicles.
Sign up for our Newsletter  
Privacy Policy | Order A Catalog | Warranty Information| Site Map
©2008 Edelbrock Corporation