Oldsmobile 400-455 V8 VICTOR 455 OLDS (4500-7500 rpm)
New Edelbrock Victor drag racing manifolds provide power levels never before available for
competition single-carb 455 Olds engines. In independent flow testing, our port-matched design
out-flowed the best fully ported manifolds on the market. Featuring a single-plane "air-gap" design, they are
available for square-bore or 4500 Series carbs to accommodate many competition applications, and offer
significant horsepower increases over existing intakes in the 4500 to 7500 rpm range. With a carb mount
pad height of 8.2", these manifolds stand more than three inches taller than the Edelbrock Torker manifold
and incorporate a high-flow 3.4-square-inch runner. We've removed the intake bolts between the runners,
thus creating a smoother airflow path for higher airflow and more power! Both manifolds feature
a port size and shape that has been optimized to match the flow characteristics of Edelbrock Performer RPM
aluminum cylinder heads.
Applications
Part #
Victor 455 Oldsmobile Manifold for Standard Flange Square-Bore Carb
#2810*
Victor 455 Oldsmobile Manifold for 4500 Series Carb
#2811*
Carburetor Recommendations:
Any carburetor class allows.
Installation Notes: For marine/competition use, contact Mondello Performance at (805) 237-8808 for
correct gasket kit. HEI will clear. Manifold height: A-8.20", B-8.20" see A/B Measurements. See manifold reference dimensions.
*
Not legal for sale or use on pollution controlled motor vehicles.
AMC
Installation Notes: For marine/competition use, contact Mondello Performance at (805) 237-8808 for
correct gasket kit. HEI will clear. Manifold height: A-8.20", B-8.20" see 
