Edelbrock.com - Manifolds - Pontiac

MANIFOLDS - Pontiac - Multiple Carbs

Back to Pontiac Main Manifold Page

Pontiac 326-455 V8
PONTIAC P-65 DUAL-QUAD (idle-5500 rpm)
Designed for 1965-79 street 326-455 c.i.d. Pontiac V8s (except Ram Air V), this manifold is a direct reproduction of the original Edelbrock Pontiac P-65 manifold delivering classic Edelbrock performance from off-idle to 5500 rpm. Bosses at the rear of the manifold accommodate brake booster, accessory bracket and throttle linkage. The flanges match the ports on the Edelbrock Performer RPM Pontiac heads for proven performance. Use with Performer-Plus cam #2157 for low-end torque or Torker-Plus cam #5057 for top-end power. Not for HEI distributors. Carb center to carb center: 6-7/16".

Applications

Part #

Pontiac P-65 (non-EGR)

#5450*

Polished Pontiac P-65 (non-EGR)

#54501*

Dual-Quad Braided Fuel Line Kit

#8088

Dual-Quad Braided Fuel Line Kit with Endura finish

#8091

Dual-Quad Progressive Throttle Linkage Kit

#7094

Carburetor Recommendations: Performer Series #1404 (500 cfm), #1405 (600 cfm), Thunder Series AVS #1803/#1804 (500 cfm), #1805 (650 cfm)

Installation Notes: Recommended intake gasket: Edelbrock #7280. Manifold height: A-5.9", B-6.34", measured to engine block, Carb pad height: 6.12" see A/B Measurements. Port exit dimensions: 1.07" x 2.02".

Performer-Plus Camshaft/lifters/lube Kit (high-torque)	Torker-Plus Camshaft/lifters/lube Kit (high-horsepower)
Elite Series Oval Air Cleaner	Pro-Flo Chrome Oval Air Cleaner

*	Not legal for sale or use on pollution controlled motor vehicles.

Order A Catalog

Warranty Information