|
EDELBROCK NITROUS BOTTLE ACCESSORIES
A VARIETY OF COMPLETE NITROUS BOTTLE AND BOTTLE KIT ACCESSORIES |
 |
REPLACEMENT BILLET HAND WHEEL - This replacement handwheel fits our 5-lb., 10-lb., 15-lb., 20-lb., and carbon fiber nitrous bottle valves. |
 |
| Applications |
Part # |
| Billet Handwheel |
72352 |
|
|
REPLACEMENT PRESSURE RELIEF DISKS - These Pressure Relief Disks include Safety Blow Off Adapters. |
 |
| Applications |
Part # |
| For 12-oz./2-lb./2.5-lb. Bottles |
72410 |
| For 10-lb./12.5-lb./15-lb./20-lb. Bottles |
72411 |
|
|
REPLACEMENT BOTTLE VALVE - Replacement high-flow valve and heavy-duty siphon tube for Edelbrock nitrous bottles. |
 |
| Applications |
Part # |
| Standard 12-oz. Bottle Valve |
72312 |
| Standard 2-lb. Bottle Valve |
72313 |
| Standard 10-lb. Bottle Valve with Siphon Tube |
72310 |
| Standard 15-lb. Bottle Valve with Siphon Tube |
72314 |
|
|
NITROUS BOTTLE BLANKET - This 1680 Denier nylon blanket helps to maintain consistent bottle pressure by keeping heat in the bottle when it's cold, and by protecting the bottle from direct sunlight and the possibility of over-pressurization. |
 |
| Applications |
Part # |
| Nitrous Bottle Blanket (for 10-lb. bottles) |
72075 |
|
|
NITROUS BOTTLE HEATER - The Edelbrock Nitrous Bottle Heater thermostatically raises the pressure when necessary by applying heat to the bottle to maintain a consistent bottle pressure (900-950 psi). |
 |
| Applications |
Part # |
| Bottle Heater - 12 volt (for 10-lb. and 15-lb. bottles) |
72700 |
|
|
REMOTE ELECTRIC ARMING VALVE KIT - Allows you to open and close the bottle valve with the flip of a switch from inside the driver's compartment. |
 |
| Applications |
Part # |
| Remote Electric Arming Valve Kit |
72950 |
|
|
1/4-TURN BALL VALVE KIT - Our 1/4-Turn Ball Valve Kit is designed as an emergency shut off to isolate the nitrous in the bottle from the engine compartment in case of an emergency. The valve is typically installed in the driver's compartment within reach of the driver. If an accident or fire occurs, the driver or emergency personnel need only turn the handle a 1/4 of a turn to shut off nitrous flow to the solenoids. |
 |
| Applications |
Part # |
| 1/4-Turn Ball Valve Kit (.375 orifice, rated to 2,000 psi) |
72952 |
|
|
BOTTLE NUT COMBO WRENCH - This is one handy item to keep with your bottle. Compatible with all nitrous brands, fits in your glove box, under your seat, or even in your pocket. This wrench features 3AN, 4AN, 6AN, and 1-1/4" bottle nut wrenches all in one package. Black anodized aluminum and laser etched for a sharp, clean look! |
 |
| Applications |
Part # |
| Bottle Nut Combo Wrench |
76504 |
|
|
PURGE VALVE KIT - Keeps the supply of fresh liquid nitrous at the solenoid(s) for instant and repeatable nitrous injection. This purge kit bleeds accumulated nitrous vapor from the supply lines. Includes solenoid, activation switch, filter, aircraft-quality fittings and wiring. |
 |
| Applications |
Part # |
| 4AN Purge Valve Kit |
72176 |
| 6AN Purge Valve Kit |
72178 |
|
|
BOTTLE NUT AND WASHER - These kits contain a replacement -6AN or -4AN bottle nut and Teflon® washer to seal the bottle nut to the bottle valve. |
 |
| Applications |
Part # |
| 4AN Bottle Nut and Teflon® Washer |
76507 |
| 6AN Bottle Nut and Teflon® Washer |
76505 |
| Teflon® washer for 6AN & 4AN bottle nuts |
77580 |
|
|
BLOW-DOWN TUBE & SAFETY ACCESSORIES - A blow-down tube is an essential safety feature for hatchbacks or cars with the bottle mounted in the passenger compartment. The blow-down tube will safely vent the nitrous outside the car should the safety blow. |
  |
| Applications |
Part # |
| Nitrous Blow-Down Tube (22" long) |
72960 |
| Racer Safety Blow-Off Adapter (for use with Blow-Down Tube) |
72961 |
| Standard Replacement Safety Valve |
72901 |
|
Carb/Plate Kits
