|
EDELBROCK DIRECT PORT ACCESSORIES
GET THE ACCESSORIES THAT MAXIMIMIZE PERFORMANCE |
 |
DIRECT PORT V8 RE-PLUMB KIT - This kit is intended for racers who have a Victor Direct Port Kit, and want to transfer it to a different intake manifold. This kit provides everything needed without the hassle of having to buy each component individually. |
 |
| Applications |
Part # |
| Direct Port Re-Plumb Kit |
71880 |
|
|
DIRECT PORT 4-CYLINDER RE-PLUMB KIT - This kit is intended for racers who have a Victor Direct Port Kit, and want to transfer it to a different intake
manifold. This kit provides everything needed without the hassle of having to buy each component individually. |
 |
| Applications |
Part # |
| Direct Port Re-Plumb Kit |
71881 |
|
|
BILLET DISTRIBUTION BLOCKS - Use these high-quality distribution blocks to build a custom nitrous system. Machined from billet
aluminum and anodized, they deliver even distribution and optimum flow. Inlets/outlets are 1/8" NPT. |
 |
| Applications |
Part # |
| One-In, Four-Out Distribution Block (black) |
76574 |
| One-In, Four-Out Distribution Block (blue, -6 for nitrous or fuel lines) |
76538 |
| One-In, Eight-Out Distribution Block (black) |
76578 |
| One-In, Six-Out Distribution Block (black) |
76578 |
|
|
NITROUS NOZZLE PIPE TAPS - Use these NPT taps to cut threads for custom installation of Edelbrock nitrous nozzles. Use Pipe Tap #76549 for Edelbrock E2, E3, and dry nozzles, #76559 is designed for E1 nozzles. |
 |
| Applications |
Part # |
| 1/16" NPT Pipe Tap (for E2, E3, and dry nozzles) |
76549 |
| 1/8" NPT Pipe Tap (for E1 nozzles) |
76559 |
|
|
TUBE BENDING TOOL - Makes installation of those tough-to-bend direct port nitrous lines a breeze. Get a professional looking installation every time. Can also be used on other 3/16" hard lines. |
 |
| Applications |
Part # |
| 3/16" Tube Bending Tool |
76503 |
|
|
NITROUS RELAY ASSEMBLY HARNESS - Use the Edelbrock Relay Assembly as a replacement harness if you are transferring a nitrous system into a different vehicle or with many other devices which require a wide open throttle activation. |
 |
| Applications |
Part # |
| 30 Amp Relay Assembly (includes switches, relay, wiring and connectors) |
72270 |
|
|
NITROUS E1, E2, E3, AND DRY EFI NOZZLES - needs copy here |
 |
| Applications |
Part # |
| |
| E1 Series Nozzles |
| E1 Nozzle 90° (1/8" NPT, 1 only) |
72550 |
| E1 Nozzle 90° (1/8" NPT, 8-pack) |
72560 |
| |
| E2 Series Nozzles |
| E2 Nozzle(1/16" NPT, 1 only) |
72552 |
| E2 Nozzle (1/16" NPT, 8-pack) |
72562 |
| |
| E3 Series Titanium Nozzles |
| E3 Titanium Nozzle(1/16" NPT, 1 only) |
72553 |
| E3 Titanium Nozzle (1/16" NPT, 8-pack) |
72563 |
| |
| Dry EFI Nozzles |
| Aluminum EFI 90° Nozzle (1/16" NPT, 1 only) |
72551 |
| Stainless Steel EFI 90° Nozzle (1/16" NPT, 1 only) |
72556 |
|
|
NOZZLE INSTALLATION BUNGS - These aluminum bungs allow installation of Edelbrock nozzles in the intake tract of thin walled
sheetmetal manifolds. Requires welding, drilling and tapping for installation. |
 |
| Applications |
Part # |
| Nozzle Installation Bungs (4-Pack) |
72555 |
|
|
SUPER VICTOR DIRECT PORT JET PACK - This kit was developed for the Super Victor Direct Port Nitrous System and includes 56 jets, 8 each of .020", .024", .028", .032", .036", .040", and .044". Edelbrock CNC-machined stainless steel jets won?t erode like brass jets and maintain precise dimensions for accurate and safe hp gains. Use this kit to fine tune your nitrous system for maximum performance. Will also work with most other brands of nitrous systems (except NX). |
 |
| Applications |
Part # |
| Super Victor Direct Port Jet Pack |
73012 |
|
|
"Y" FITTINGS - Manufactured by Russell, our wide variety of lightweight aluminum, stainless and brass adapter fittings allow for the connection of Russell nitrous hose ends to almost any component. Use the AN size that matches your hose and the NPT (National Pipe Thread) size that matches the component you are plumbing. Our filter fittings prevent debris from clogging nitrous or fuel jets and are designed to be used in-line with your nitrous system in place of standard fittings. |
 |
| Applications |
Part # |
| |
| Flare to Flare "Y" Fittings |
| 3AN - 3AN - 3AN (red) |
76519 |
| 4AN - 4AN - 4AN (blue) |
76536 |
| 4AN - 4AN - 4AN (red) |
76537 |
| 6AN - 6AN - 6AN (blue) |
76546 |
| 6AN - 6AN - 6AN (red) |
76547 |
| 8AN - 8AN - 8AN (blue) |
76570 |
| 8AN - 8AN - 8AN (red) |
76571 |
| 10AN - 10AN - 10AN (red) |
76573 |
| |
| 1/8" NPT to Flare Jet Adapter "Y" Fittings |
| 1/8" NPT - Flare Jet (blue) |
76557 |
| 1/8" NPT - Flare Jet (red) |
76558 |
|
|
DIRECT PORT KIT FITTINGS - Manufactured by Russell, our wide variety of lightweight aluminum, stainless and brass adapter fittings allow for the connection of Russell nitrous hose ends to almost any component. Use the AN size that matches your hose and the NPT (National Pipe Thread) size that matches the component you are plumbing. Our filter fittings prevent debris from clogging nitrous or fuel jets and are designed to be used in-line with your nitrous system in place of standard fittings. |
 |
| Applications |
Part # |
| |
| Compression Fittings |
| 1/8" NPT - 3/16" Tube, includes Ferrule (brass) |
76560 |
| |
| Tubing |
| 3/16" Stainless Steel Tube Bundle, 12" long, qty. 16 (stainless) |
76562 |
| |
| Ferrules |
| 3/16" Tube Barrel Ferrule, qty. 4 (brass) |
76561 |
| |
| Tube Nuts |
| 3AN - 3/16" Tube (red) |
76528 |
| 3AN - 3/16" Tube (blue) |
76529 |
| |
| Tube Sleeves |
| 3/16" Tube Sleeve, 2 per pkg. (Endura) |
76563 |
|
Carb/Plate Kits
