|
EDELBROCK HIGH PERFORMANCE FUEL PUMPS
AVAILABLE FOR BOTH CARBURETED AND EFI APPLICATIONS |
 |
QUEIT-FLO™ ELECTRIC FUEL PUMPS - Manufactured by Essex Industries, one of the most renowned fuel system manufacturers, these state-ofthe- art Electric Fuel Pumps offer maximum performance in a compact package. With anodized aluminum housings and high-quality internals, they are both strong and durable. Each pump is factory-tested and includes mounting brackets. The carbon fiber vanes and composite rotors give these pumps the added boost for maximum performance. The high quality construction results in a pump that is 4 to 14 dB quieter than competitors pumps at the same pressure. #1791 is factory preset to 6.5 psi and no regulator is required for most applications. Includes a replaceable screen type inlet filter, the free flow rate of 120 GPH is sufficient to supply 600 hp. #1792 has a free flow rate of 160 GPH, enough to feed a 1000 hp engine. This pump is factory preset to 12 psi and requires an external regulator such as the Edelbrock regulator #1727. Current draw: 3.2 amps @ 12 VDC, 3.6 amps @ 14 VDC.
IMPORTANT NOTES: These pumps should be mounted as close to the fuel tank as possible, at or below the fuel level. For proper installation and voltage requirements, use fuel pump relay kit #1795. |
 |
| Applications |
Part # |
| 120 GPH (free flow), 3/8" NPT Inlet/Outlet (for Carbureted Applications) |
1791 |
| 160 GPH (free flow), 1/2" NPT Inlet/Outlet (for Carbureted Applications) |
1792 |
| |
| Universal Fuel Pump Relay Kit |
| Fuel Pump Relay Kit for #1791 and #1792 |
1795 |
|
|
ELECTRIC FUEL PUMPS FOR EFI - These EFI fuel pumps are also manufactured by Essex Industries. With anodized aluminum housings and high-quality internals, they are both strong and durable. Each pump is factory-tested and includes mounting brackets. #1790 features a -10 AN inlet/outlet and a flow rate of 80 GPH at 45 psi for use with high-hp fuel injected applications. The in-line design keeps the pump motor and components cool even under harsh conditions. The Victor EFI fuel pump #1794 is rated at 120 GPH at 45 psi and has -12 AN inlet/outlets and is compatible with all grades of gasoline and methanol type fuels. |
 |
| Applications |
Part # |
| 80 GPH at 45 psi, -10 AN Inlet/Outlet (for EFI applications) |
1790 |
| 120 GPH at 45 psi, -12 AN Inlet/Outlet (for EFI applications) |
1794 |
|
|
STREET/STRIP ELECTRIC FUEL PUMP - Street/Strip fuel pumps can be utilized as an inline booster pump or as a stand-alone unit. These pumps are continuous duty rated and are ideal for EFI applications that require additional pumping capabilities due to upgrade modifications such as high compression pistons, high flow intake manifolds, big bore throttle bodies, cams, turbo kits, superchargers and nitrous applications up to 600 HP. Includes mounting brackets, 3/8" barb fittings. Match with EFI regulator #1728 for adjustability from 35 to 90 psi. |
 |
| Applications |
Part # |
| 57 GPH (215 liter/hr), 3/8" Hose Barb Fittings |
3594 |
|
|
HIGH PERFORMANCE IN-TANK FUEL PUMPS - These OE in-tank upgrade pumps are ideal for supporting performance improvements such as a high performance intake manifold, cams, turbo, direct port nitrous systems, big-bore throttle body, etc. They replace your original pump exactly and include all necessary hardware for an easy installation. |
 |
| Applications |
Part # |
| |
| For 1985-97 Ford Mustang (exc. 1996-97 Cobra) |
| 155 Liter/hr. (41 GPH) |
17930 |
| 190 Liter/hr. (50 GPH) |
17931 |
| 255 Liter/hr. (67 GPH) |
17932 |
| 255 Liter/hr. (67 GPH) High Pressure for Turbo or Nitrous |
17935 |
| |
| For 1985-92 fuel-injected GM vehicles, non-TBI |
| 255 Liter/hr. (67 GPH) |
17933 |
| |
| For 1984-90 front wheel drive Chrysler vehicles |
| 255 Liter/hr. (67 GPH) |
17934 |
| |
| For 1994-99 Acura Integra & 1992-00 Honda Civic |
| 190 Liter/hr. (50 GPH) |
17938 |
| 255 Liter/hr. (67 GPH) |
17936 |
| 255 Liter/hr. (67 GPH) High Pressure for Turbo or Nitrous |
17937 |
|
Carb/Plate Kits
