AN INTRODUCTION TO EDELBROCK NITROUS SYSTEMS FOR SUPERIOR NITROUS PERFORMANCE
Edelbrock is known for innovative products, and our new Nitrous Systems are no exception... All Edelbrock Nitrous Systems are dyno-tested and calibrated to deliver accurate and safe horsepower gains with even distribution to each cylinder. Our nitrous calibrations are determined through dyno-testing, not simple mathematical formulas, which do not take into account real-world variables. Available from 50 to 500+ horsepower, Edelbrock Nitrous Systems and components are the quickest and easiest way to get large horsepower increases with minimum engine modifications and expense. With the Performer and Performer RPM Line of Nitrous Systems, you get a 50 to 250 horsepower increase at the flip of a switch with an installation time of approximately 4 hours. New Performer RPM II systems include high-flow solenoids and stainless steel spray bars for 400+ hp capability. Victor Jr. racing systems produce serious horsepower with jetting supplied from 200 to 500+ horsepower. If you want to take it up to the extreme level we have the Edelbrock Series 1, Series 2 and Series 3 Direct-Port Nitrous Systems which yield huge gains in excess of 500+ horsepower! Edelbrock also makes nitrous kits and components for Harley Bikes, Sport and Metric Bikes, and Offroad Sport Atv. Check out these advanced features... CLICK HERE to download nitrous pdf.
CARB AND PLATE KITS Edelbrock Nitrous Plate Systems give you the horsepower numbers you are looking for in a system that's easier to install than other systems on the market. Designed to be the best carb/plate kits available, supplied with more jets than other brands giving you greater tuneability. Our spray bars are precision machined on an EDM machine instead of standard drilling, giving you the best flow characteristics available.
EFI SYSTEMS Performer EFINitrous Systems are the best way to get major power increase from your vehicle. Kits are supplied with all the necessary components and detailed instructions for a simple and clean installation. The nitrous system interfaces with the OE fuel system and increases fuel flow to the existing fuel injectors when the system is armed & triggered.
DIRECT PORT SYSTEMS Our most sophisticated nitrous systems allow you to tune each individual cylinder for superior performance! Utilizing your choice of either Edelbrock E1, Edelbrock/Glidden E2 stainless steel, our unique E3 titanium "Straight-Shot" nozzles, or Stainless Steel Dry nozzles for EFI applications, these direct port kits are designed for serious competition with power increases of up to 500 horsepower or more. To build a new system, match these kits with an Edelbrock Bottle Kit for maximum race-level performance with the bottle/bracket combination you want. For racers with an existing system, our manifold Plumb Kits include everything to plumb a manifold only (no wiring harness, relays, or thread tap).
BOTTLES, BOTTLE KITS AND BRACKETS Edelbrock nitrous bottles are made of aluminum alloy, are D.O.T. approved and include an Edelbrock highflow CGA approved valve with a built-in siphon tube (unless noted otherwise) for consistent performance. Available with Silver Powder Coated, Polished and Carbon Fiber Wrapped(12.5-lb only) finish. In nine sizes to suit any application. Note: All bottles are shipped empty.
NOZZLES (E1, E2, E3, AND DRY) Edelbrock Nitrous Oxide Nozzles are the most advanced Nozzles available producing the highest power output in the industry. The "E" Series available in three distinct designs: E1 aluminum 90 degree 1/8 NPT, E2 stainless steel 90 degree 1/16 NPT, and E3 titanium straight shot 1/16 NPT. All are CNC machined to strict tolerance and designed for maximum atomization and distribution. Edelbrocks "DRY" nozzle features a unique nitrous passage design providing extremely high atomization and is the key to the outstanding performance.
JETS A full range of Edelbrock CNC-machined stainless steel nitrous oxide jets and fuel taper face jets are available in virtually any size for your power and tuning requirements. Jets are available individually or in packs of 8.
SOLENOIDS Designed for Edelbrock nitrous systems, these stainless steel solenoids have a very low amp draw. They feature a stainless steel base for corrosion resistance and tighter tolerances, a low current-consumption coil, a Teflon® plunger for reliability and longevity, and a powder coated coil cover for durability and appearance
ELECTRICAL COMPONENTS AND ACCESSORIES Edelbrock offers a complete line of electrical components and accessories for your Nitrous System. The #71900 Progressive Controller offers extensive control over your nitrous system in a power full easy to program compact unit. Microswitch and bracket kits designed especially for Edelbrock, Barry Grant and Holley carburetors. Edelbrocks nitrous and fuel gauges are available in 1 1/2" and 2 5/8" diameters, standard or liquid filled. Other accessories include buttons, toggle switches, pressure switches and relay harnesses.
FUEL PUMPS AND REGULATORS Quiet-Flow Fuel Pumps are manufactured by Essex Industries with anodized aluminum housings and high-quality internals. Street/Strip fuel pumps can be utilized as an inline booster pump or as a stand-alone unit. These pumps are continuous duty rated and are ideal for EFI applications that require additional pumping capabilities from upgrade modifications such as nitrous oxide. High performance in-tank pumps are an OE upgrade that is ideal for supporting performance improvements such as direct port nitrous systems. They replace your original pump exactly. Edelbrock fuel pressure regulators provide accurate fuel pressure and delivery for any high performance fuel injected vehicle under all harsh racing conditions.
FITTINGS AND HOSES Russell Nitrous system hose assemblies are constructed using Russell Power-Flex stainless steel braided hose. They feature a TeflonŽ inner liner and 308 stainless steel outer braid for the ultimate in strength, corrosion resistance and appearance. The Russell hose ends feature precision crimp installation using a hydraulic crimping method that provides a leak-free connection. Use Hoses with blue fittings for nitrous, and red fittings for fuel. Our wide variety of lightweight aluminum, stainless and brass adapter fittings allow for the connection of Russell nitrous hose ends to almost any component.
Carb/Plate Kits
