|
Edelbrock Nitrous Jets |
 |
TUNER JET KITS - Our CNC-machined stainless steel jets are available in Tuner Kits packaged in indexed, heavy-duty plastic cases. They include a variety of Edelbrock jets to fine tune your nitrous system for maximum performance. |
 |
| Applications |
Part # |
| Master Kit - 328 jets, 8 each of 41 sizes (.018" to .120") |
73003 |
| Race Kit - 216 jets, 8 each of 27 sizes (.028" to .120") |
73004 |
| Street Kit - 80 jets, 4 each of 20 sizes (.014" to .059") |
73003 |
|
|
SUPER VICTOR DIRECT PORT JET PACK - This kit was developed for the Super Victor Direct Port Nitrous System and includes 56 jets, 8 each of .020", .024", .028", .032", .036", .040", and .044". Edelbrock CNC-machined stainless steel jets won't erode like brass jets and maintain precise dimensions for accurate and safe hp gains. Use this kit to fine tune your nitrous system for maximum performance. Will also work with most other brands of nitrous systems (except NX). |
 |
| Applications |
Part # |
| Super Victor Direct Port Jet Pack |
73012 |
|
|
REPLACEMENT JET KITS - Replacement Jet Kits contain all of the jet originally supplies with Edelbrock Plate Nitrous Kits. |
 |
| Applications |
Part # |
| For Performer Square-Bore (3 steps - .038, .046, .053, .057, .065) |
73001 |
| For Performer RPM Square-Bore (5 steps - .055, .061, .071, .075, .078, .082, .085, .089, .099, .102) |
73002 |
| For Performer RPM Spread-Bore (3 steps - .059, .062, .071, .075, .081, .086) |
73010 |
| For Performer RPM 4500 Series Square-Bore (4 steps - .057, .063, .071, .075, .085, .089, .104, .108) |
73011 |
|
|
TAPER FACE JETS - A full range of Edelbrock nitrous oxide and fuel taper face jets are available in virtually any size for your power and tuning requirements. Jets are available individually or in packs of 8. To order individually packed jets, add the jet size desired to #73 (#73014 is a .014" jet). |
 |
| Applications |
Part # |
| Individual Taper Face Jets (undrilled blank) |
73013 |
| Individual Taper Face Jets (last 3 digits indicate size, .014" thru .120") |
73014-73120 |
| Packs of 8 Taper Face Jets (last 2 digits indicate size, .018" thru .048") |
73218-73248 |
|
|
INDIVIDUAL FUNNELL JETS - Designed for use with 1/8" tubing, Edelbrock funnel jets are available for small nitrous systems such as those used on motorcycles, snowmobiles, etc. These stainless steel jets won't erode like brass jets and maintain precise dimensions for accurate and safe horsepower gains. May be used with other manufacturer systems designed for 1/8" funnel jets. Jets are available individually. To order jets, add the jet size desired to #74 (#74011 is an .011" jet). |
 |
| Applications |
Part # |
| Funnele Jets (undrilled blank) |
74000 |
| Last 3 digits Indicate Size (.009" thru .050") |
74009-74050 |
|
Carb/Plate Kits
