|
Edelbrock Carb / Plate Performer RPM Nitrous Kit |
 |
PERFORMER RPM NITROUS CARB / PLATE KITS (SINGLE STAGE: 100-250 ADDED HP) - Performer RPM single-stage nitrous systems are designed for use on carbureted V8s. The solenoids are larger than our Performer systems and power increases can be adjusted from 100-250 horsepower. Edelbrock Nitrous Systems are simple to install with a 1/2" thick aluminum plate that fits between the \carburetor and the manifold. |
| |
FEATURES:
- Designed for carbureted V8s
- Power increases from 100-250 HP
- Simple to install - a low-profile 1/2" thick aluminum injector plate fits between the carb and the manifold
- Precision EDM machined spray bars for the best flow characteristics
- Available with silver powder coated or polished aluminum 10-lb. bottle
|
 |
| Applications |
Part # |
| |
| Silver Powder Coated Bottle |
| Square-Bore Carbs (100-150-175-200-250 HP) |
70050 |
| Spread-Bore (Q-Jet) Carbs (100-150-175 HP) |
70051 |
| 4500 Series Carbs (100-150-200-250 HP) |
70053 |
| |
| Polished Aluminum Bottle |
| Square-Bore Carbs (100-150-175-200-250 HP) |
70033 |
| Spread-Bore (Q-Jet) Carbs (100-150-175 HP) |
70034 |
| 4500 Series Carbs (100-150-200-250 HP) |
70035 |
| |
Performer to Performer RPM Nitrous Plate Kits
Use Edelbrock Nitrous Plate Kits to upgrade existing nitrous systems. Nitrous plate kits include high-quality, powder coated aluminum nitrous plates, stainless steel jet assortment and stainless steel lines from plate to solenoids. |
| Performer RPM Square-Bore Upgrade Kit (100-150-175-200-250 HP) |
70021 |
| Performer RPM Spread-Bore (Q-Jet) Upgrade Kit (100-150-175 HP) |
70022 |
|
|
PERFORMER RPM NITROUS CARB / PLATE KITS (DUAL STAGE: 50-250 ADDED HP) - Performer RPM Dual-Stage Nitrous Systems are designed for those who want to add power in stages to soften the "hit" of the nitrous system.This is one of the best ways to control excessive tire spin or violent chassis reaction. Performer RPM Dual-Stage Systems allow you to adjust the first stage to supply 100-150 additional horsepower, then trigger the second stage for 150-250+ horsepower. They include all the high quality features of single stage Performer RPM systems with the additional solenoids and spray bar plate to add a second stage of nitrous to your engine. |
| |
FEATURES:
- Designed for carbureted V8s
- Power increases from 100-250 HP
- Simple to install - a low-profile 1/2" thick aluminum injector plate fits between the carb and the manifold
- Precision EDM machined spray bars for the best flow characteristics
- Available with silver powder coated or polished aluminum 10-lb. bottle
|
 |
| Applications |
Part # |
| |
| Silver Powder Coated Bottle |
| Square-Bore Carbs (75-250 HP) |
70003 |
| Spread-Bore (Q-jet) Carbs (50-200 HP) |
70004 |
| |
| Performer RPM Single to Dual-Stage Upgrade Kits |
| Performer RPM Dual-Stage Upgrade Kit (75-250 HP) |
70005 |
| |
Performer RPM Nitrous Plate Kits
Use Edelbrock Nitrous Plate Kits to upgrade existing nitrous systems. Nitrous plate kits include high-quality, powder coated aluminum nitrous plates, stainless steel jet assortment and stainless steel lines from plate to solenoids. |
| For Square-Bore Carburetors (100-250 HP) |
70060 |
| For Spread-Bore (Q-Jet) Carburetors (100-175 HP) |
70061 |
| For 4500 Series Carbs (100-250 HP) |
70063 |
|
|
PERFORMER RPM NITROUS CARB / PLATE KITS (DUAL-QUAD: 100-250 ADDED HP) - Performer RPM single-stage nitrous systems are designed for use on carbureted V8s with dual-quad square-bore or 4500 series carburetors. The solenoids are larger than our Performer systems and power increases can be adjusted from 100-250 horsepower. Edelbrock Nitrous Systems are simple to install with two 1/2" thick aluminum plates that fit between the carburetors and the manifold. |
| |
FEATURES:
- Designed for carbureted V8s
- Power increases from 100-250 HP
- Simple to install - a low-profile 1/2" thick aluminum injector plate fits between the carb and the manifold
- Precision EDM machined spray bars for the best flow characteristics
- Available with silver powder coated or polished aluminum 10-lb. bottle
|
 |
| Applications |
Part # |
| |
| Silver Powder Coated Bottle |
| Square-Bore Carbs (100-250 HP) |
70090 |
| 4500 Series Carbs (100-250 HP) |
70092 |
| |
| Polished Aluminum Coated Bottle |
| Square-Bore Carbs (100-250 HP) |
70091 |
| 4500 Series Carbs (100-250 HP) |
70093 |
|
|
| Engine Modifications for All Performer RPM Carb and Plate Kits |
Recommended |
Required |
| Single Plane Intake Manifold |
X |
- |
| Premium Fuel |
- |
X |
| Race Fuel |
X |
- |
| Upgraded Fuel System |
- |
X |
| Upgraded Ignition System |
- |
X |
| Ignition Retard |
- |
X |
| Colder Spark Plugs |
- |
X |
| Forged Pistons |
- |
X |
| Upgraded Rods/Crank |
X |
- |
|
|
Carb/Plate Kits
