|
Edelbrock Carb / Plate Performer RPM II Nitrous Kits |
 |
PERFORMER RPM II NITROUS CARB / PLATE KITS (SINGLE STAGE: 200-400+ ADDED HP) - Performer RPM II Nitrous Carb/Plate Systems are available in single or dual-stage configurations for
power gains from 200 to 400+ horsepower. Using stainless steel spray bars rather than standard brass for maximum durability, these systems also utilize our Victor Pro fuel solenoids and Victor Pro bottom discharge nitrous solenoids for enhanced flow capacity. Performer RPM II single-stage nitrous systems are designed for use on carbureted V8 engines. They feature Victor Pro fuel solenoids and Victor Pro bottom discharge nitrous solenoids for enhanced flow capacity. Power increases can be adjusted from 200-400+ horsepower. The 1/2" thick aluminum spray bar plate fits between the carburetor and the intake manifold and features stainless steel spray bars with more discharge holes than Performer RPM systems for more flow and superior atomization. |
| |
FEATURES:
- Designed for carbureted V8s
- Power increases from 200-400+ hp
- Stainless steel spray bars for maximum durability
- Simple to install - a low-profile 1/2" thick aluminum injector plate fits between the carb and the manifold
- Precision EDM machined spray bars for the best flow characteristics available
- Powder coated aluminum nitrous bottle
|
 |
| Applications |
Part # |
| |
| Silver Powder Coated Bottle |
| Square-Bore Carbs (200-400+ HP) |
70080 |
| 4500 Series Carbs (200-400+ HP) |
70081 |
| |
Performer RPM to Performer RPM II Nitrous Plate Kits
Use Edelbrock Nitrous Plate Kits to upgrade existing nitrous systems. Nitrous plate kits include high-quality, powder coated aluminum nitrous plates, stainless steel jet assortment and stainless steel lines from plate to solenoids. |
| Square-Bore Carbs (200-400+ HP) Converts #70050 or #70033 |
70085 |
| 4500 Series Carbs (200-400+ HP) Converts #70053 or #70035 |
70086 |
| |
Performer RPM II Nitrous Plate Kits
Use Edelbrock Nitrous Plate Kits to upgrade existing nitrous systems. Nitrous plate kits include high-quality, powder coated aluminum nitrous plates, stainless steel jet assortment and stainless steel lines from plate to solenoids. |
| Nitrous Plate Kit, Performer RPM II Squareflange |
70088 |
| Nitrous Plate Kit, Performer RPM II Dominator Flange |
70089 |
|
|
| Engine Modifications for All Single Stage Performer RPM II Carb and Plate Kits |
Recommended |
Required |
| Single Plane Intake Manifold |
- |
X |
| Premium Fuel |
- |
X |
| Race Fuel |
X |
- |
| Upgraded Fuel System |
X |
- |
| Upgraded Ignition System |
X |
- |
| Ignition Retard |
- |
X |
| Colder Spark Plugs |
- |
X |
| Forged Pistons |
- |
X |
| Upgraded Rods/Crank |
X |
- |
|
|
PERFORMER RPM II NITROUS CARB / PLATE KITS (DUAL STAGE: 200-400+ ADDED HP) - Performer RPM II Nitrous Carb/Plate Systems are available in single- or dual-stage configurations for power gains from 100 to 400+ horsepower. Using stainless steel spray bars rather than standard brass for maximum durability, this dual-stage system utilizes our Performer RPM nitrous and fuel solenoids for the first stage and Victor Pro Fuel solenoid and Victor Pro bottom discharge nitrous solenoid for enhanced flow on the second stage. Performer RPM II Dual-Stage Nitrous Systems are designed for those who want to add power in stages to soften the "hit" of the nitrous system. This is one of the best ways to control excessive tire spin or violent chassis reaction. Performer RPM Dual-Stage Systems allow you to tune the first stage to supply 100-200 additional horsepower, then switch to the second stage for 200-400+ horsepower. |
| |
FEATURES:
- Designed for carbureted V8s
- Power increases from 100-400+ HP
- Add power in stages to soften the "hit" of the nitrous system
- Stainless steel spray bars for maximum durability
- Simple to install - a low-profile 1/2" thick aluminum injector plate fits between the carb and the manifold
- Precision EDM machined spray bars for the best flow characteristics available
|
 |
| Applications |
Part # |
| |
| Silver Powder Coated Bottle |
| Square-Bore Carbs (100-400+ HP) |
70082 |
| 4500 Series Carbs (100-400+ HP) |
70083 |
| |
Performer RPM II Single to Dual-Stage Nitrous Plate Kits
Use Edelbrock Nitrous Plate Kits to upgrade existing nitrous systems. Nitrous plate kits include high-quality, powder coated aluminum nitrous plates, stainless steel jet assortment and stainless steel lines from plate to solenoids. |
| Dual-Stage Upgrade Kit for Square-Bore or 4500 Series Carbs (100-400+ HP) converts #70080 & #70081 |
70087 |
|
|
| Engine Modifications for All Dual Stage Performer RPM II Carb and Plate Kits |
Recommended |
Required |
| Single Plane Intake Manifold |
- |
X |
| Premium Fuel |
- |
X |
| Race Fuel |
X |
- |
| Upgraded Fuel System |
- |
X |
| Upgraded Ignition System |
X |
- |
| Ignition Retard |
- |
X |
| Colder Spark Plugs |
- |
X |
| Forged Pistons |
- |
X |
| Upgraded Rods/Crank |
X |
- |
|
|
Carb/Plate Kits
