|
Edelbrock Carb / Plate Victor Jr.Nitrous Kits |
 |
VICTOR JR. NITROUS CARB / PLATE KITS (SINGLE-STAGE: 200-400+ ADDED HP) - Dyno tests on a 500-inch Chevy proved that even at 400 HP settings, EGTs varied less than 5% from cylinder-to-cylinder. Features include shorter spray bars allowing more liquid nitrous to be injected into the intake for more even distribution across the plenum, a more balanced air/fuel ratio and a quicker response time. With four nitrous and four fuel jets, the Edelbrock Victor Jr. Plate System has more tuning capabilities than any plate system currently available. This efficient design, with a billet aluminum plate that's only 11/16" thick, uses less nitrous than conventional plate systems at the same power levels. Kits include everything shown to the right including a 10-lb. nitrous bottle (shipped empty), stainless steel jet selection, hardware and owner's manual for a complete installation. Add billet aluminum Solenoid Brackets #72286 or #72287 for an even more professional looking installation. |
| |
FEATURES:
- Designed for carbureted V8s
- Power increases from 200-400+ HP
- Simple to install - a low-profile 11/16" thick billet aluminum injector plate fits between the carb and the manifold
- Precision EDM machined spray bars for the best flow characteristics available
- Powder coated aluminum nitrous bottle
|
 |
| Applications |
Part # |
| |
| Silver Powder Coated Bottle |
| Square-Bore Carbs (200-300-400+ HP) |
70056 |
| 4500 Series Carbs (200-300-400+ HP) |
70055 |
| |
| Victor Jr. Upgrade Kits (Performer RPM or Similar System to Victor Jr.) |
| Square-Bore Carbs (200-400+ HP) |
70024 |
| 4500 Series Carbs (200-400+ HP) |
70025 |
| |
Victor Jr. Plate Kits (includes spray bar plate, solenoid lines, gaskets, studs and jets)
Use Edelbrock Nitrous Plate Kits to upgrade existing nitrous systems. Nitrous plate kits include high-quality, powder coated aluminum nitrous plates, stainless steel jet assortment and stainless steel lines from plate to solenoids. |
| Square-Bore Carbs |
70014 |
| 4500 Series Carbs |
70015 |
|
|
VICTOR JR. NITROUS CARB / PLATE KITS (DUAL-STAGE: 100-500+ ADDED HP) - Victor Jr. Dual-Stage Nitrous Systems are designed for those who want to add power in stages to soften the "hit" of the nitrous system. This is one of the best ways to control excessive tire spin or violent chassis reaction. Victor Jr. Dual-Stage Systems allow you to adjust the first stage to supply 100-150 additional horsepower, then trigger the second stage for 150-250+ hp. They include all the high quality features of single stage Victor Jr. systems but allow you to add a second stage of nitrous to your engine. |
| |
FEATURES:
- Designed for carbureted V8s
- Power increases from 100-500+ HP
- Add power in stages to soften the "hit" of the nitrous system
- Simple to install - a low-profile 11/16" thick billet aluminum injector plate fits between the carb and the manifold
- Precision EDM machined spray bars for the best flow characteristics available
- Powder coated aluminum nitrous bottle
|
 |
| Applications |
Part # |
| |
| Silver Powder Coated Bottle |
| Square-Bore Carbs (100-500+ HP) |
70066 |
| 4500 Series Carbs (100-500+ HP) |
70065 |
| |
| Victor Jr. Single to Dual-Stage Upgrade Kit |
| Square-Bore Carbs (100-500+ HP) Converts #70056 |
70068 |
| 4500 Series Carbs (100-500+ HP) Converts #70055 |
70067 |
|
|
| Engine Modifications for All Victor Jr. Carb and Plate Kits |
Recommended |
Required |
| Single Plane Intake Manifold |
- |
X |
| Premium Fuel |
- |
X |
| Race Fuel |
X |
- |
| Upgraded Fuel System |
- |
X |
| Upgraded Ignition System |
X |
- |
| Ignition Retard |
- |
X |
| Colder Spark Plugs |
- |
X |
| Forged Pistons |
- |
X |
| Upgraded Rods/Crank |
X |
- |
|
|
Carb/Plate Kits
