|
EDELBROCK NITROUS SOLENOIDS
DESIGNED FOR EDELBROCK NITROUS SYSTEMS |
 |
EDELBROCK NITROUS SOLENOIDS - Designed for Edelbrock nitrous systems, these stainless steel solenoids have a very low amp draw. They feature a stainless steel base for corrosion resistance and tighter tolerances, a low current-consumption coil, a Teflon® plunger for reliability and longevity, and a powder coated coil cover for durability and appearance. The Victor Pro nitrous solenoid features a bottom outlet design that restricts flow much less then a standard designs. A .115" internal metering orifice makes this our highest flowing nitrous solenoid. The Victor Pro fuel solenoid features a shorter body with a smaller diameter stainless steel base for use where space is limited.
Nitrous Solenoids - Amp Draw: 9.2 amps @ 12.6 volts and 11 amps @ 13.8 volts |
 |
| Applications |
Part # |
| Performer Nitrous Solenoid - Up to 150 HP with 1/8" NPT Inlet & Outlet |
72000 |
| Performer RPM Nitrous Solenoid - 400+ HP with 1/4" NPT Inlet & 1/8" NPT Outlet |
72001 |
| Victor Pro "Bottom Exit" Nitrous Solenoid - 500+ HP with 1/4" NPT Inlet & 1/8" NPT Outlet |
72002 |
|
|
EDELBROCK FUEL SOLENOIDS - Designed for Edelbrock nitrous systems, these stainless steel solenoids have a very low amp draw. They feature a stainless steel base for corrosion resistance and tighter tolerances, a low current-consumption coil, a Teflon® plunger for reliability and longevity, and a powder coated coil cover for durability and appearance. The Victor Pro nitrous solenoid features a bottom outlet design that restricts flow much less then a standard designs. A .115" internal metering orifice makes this our highest flowing nitrous solenoid. The Victor Pro fuel solenoid features a shorter body with a smaller diameter stainless steel base for use where space is limited.
Fuel Solenoids - Amp Draw: 1.29 amps @ 12.6 volts and 1.5 amps @ 13.8 volts |
 |
| Applications |
Part # |
| Performer Fuel Solenoid - up to 175 HP at 6 PSI with 1/8" NPT Inlet & Outlet |
72050 |
| Performer RPM Fuel Solenoid - 400+ HP at 6 PSI with 1/4" NPT Inlet & 1/8" NPT Outlet |
72051 |
| Victor Pro "Small Base" Fuel Solenoid - 500+ HP at 6 PSI with 1/8" NPT Inlet & Outlet |
72052 |
|
|
ALCOHOL FUEL SOLENOID - Because it takes twice as much alcohol to make the same power as gasoline, nitrous racers need a solenoid with twice the flow capacity. This Alcohol Fuel Solenoid will support nitrous system flow requirements to 600+ HP, yet features a low amperage draw to ease the drain on your electrical system. |
 |
| Applications |
Part # |
| Alcohol Fuel Solenoid |
72054 |
|
|
SOLENOID REBUILD KITS & COILS - Rebuild Kits include TeflonŽ plunger, O-ring, plunger spring, and stem wrench. Replacement coils sold separately. |
 |
| Applications |
Part # |
| |
| Rebuild Kits |
| Performer Nitrous Solenoid |
72200 |
| Performer RPM Nitrous Solenoid |
72202 |
| Victor Pro Nitrous Solenoid |
72219 |
| Performer Fuel Solenoid |
72201 |
| Performer RPM Fuel Solenoid |
72203 |
| Victor Pro Fuel Solenoid |
72218 |
| |
| Replacement Coils |
| Performer Nitrous Solenoid |
72204 |
| Performer RPM Nitrous Solenoid |
72205 |
| Victor Pro Nitrous Solenoid |
72217 |
| Performer Fuel Solenoid |
72206 |
| Performer RPM Fuel Solenoid |
72207 |
| Victor Pro Fuel Solenoid |
72216 |
|
Carb/Plate Kits
