Billet Handwheel for Nitrous Bottle Valves
The 72352 is a replacement handwheel for use on our 5-lb., 10-lb., 15-lb., 20-lb., and carbon fiber nitrous bottle valves. These handwheels are machined from billet aluminum for a quality appearance and are anodized for durability. They are also machined with a 3" diameter body, making it easier to grasp the handwheel and easier to turn the valve on or off. The handwheels will be supplied on our high flow nitrous bottle valve but are also sold as a replacement for the handwheel on the standard bottle valve. These handwheels also fit NOS bottle valves as well.
|
 |
| |
| Billet Handwheel for Nitrous Bottle Valves |
#72352 |
|
| |
 |
| |
Bottle Valve
Replacement high-flow valve and heavy-duty siphon tube for all Edelbrock 10-pound bottles. |
| |
| Standard 10-lb. Bottle Valve with Siphon Tube |
#72310 |
| Standard 2-lb. Bottle Valve |
#72313 |
| Standard 15-lb. Bottle Valve with Siphon Tube |
#72314 |
|
| |
|
| |
Hinged Steel Brackets
Powder-coated and made of steel, these hinged brackets are designed for use with Edelbrock or other
brands of 10- and 15-lb., 7" diameter aluminum bottles. Includes rubber isolators to protect the finish.
|
 |
| |
| Red Hinged Steel Brackets (for 20-lb. aluminum bottles) |
#72319 |
| Red Hinged Steel Brackets for 10-lb. and 15-lb. aluminum bottles |
#72600 |
| Red Hinged Steel Brackets for 5-lb. aluminum bottles |
#72609 |
| Gunmetal Gray Hinged Steel Brackets for 10-lb. and 15-lb. aluminum bottles |
#76204 |
|
| |
|
| |
Quick Release Brackets
Made from CNC-machined aluminum, these Edelbrock Quick Release Brackets are black powder coated for
a unique high-tech look. They support the bottle at its strongest point... around the neck where the valve
screws in. Convenient thumb screw allows for quick bottle changes.
|
 |
| |
| Quick Release Bracket for 10-lb. aluminum bottles |
#72608 |
| Quick Release Bracket for 12.5-lb. carbon fiber bottles |
#72621 |
| Quick Release Bracket for 15-lb. aluminum Bottles |
#72606 |
|
| |
|
| |
Polished Billet Aluminum Brackets
Made from polished billet aluminum, these great looking brackets are hinged for easy installation
and removal. Designed for either aluminum or carbon fiber bottles, each bracket is sized to fit.
Roll Cage Mount Adapters are made of polished billet aluminum to match our billet bottle brackets.
They work with brackets #72603 and #72623 to mount your bottle on your roll cage or chassis tubing.
|
 |
| |
| Polished Billet Bracket for 12.5-lb. carbon fiber bottle |
#72623 |
| Polished Billet Bracket for 10-lb. and 15-lb. aluminum bottles |
#72603 |
| Polished Billet Brackets (for 5-lb. aluminum bottles) |
#72607 |
| Polished Billet Brackets (for 2-lb and 2.5-lb. aluminum bottles) |
#72664 |
| Polished Billet Bracket for 12-oz. bottle |
#72665 |
| 1-3/4" Roll Cage Mount Adapter |
#72614 |
| 1-5/8" Roll Cage Mount Adapter |
#72615 |
|
| |
|
| |
Nitrous Bottle Heater
Consistent bottle pressure (900-950 psi) is an important element for proper operation of your nitrous system.
The Edelbrock Nitrous Bottle Heater thermostatically raises the pressure when necessary by applying
heat to the bottle. Comes with all necessary hardware and includes velcro straps for quick and easy bottle
removal.
|
 |
| |
| Bottle Heater for 10-lb. and 15-lb. bottles |
#72700 |
| Bottle Heater for 2-lb. bottles |
#72703 |
|
| |
|
| |
Nitrous Bottle Blanket
Made of 1680 Denier nylon, this bottle blanket helps to maintain more consistent
bottle pressure two ways: by keeping heat in the bottle when
it's cold outside, and by protecting the bottle from direct sunlight and
the possibility of over-pressurization.
|
 |
| |
| Bottle Blanket for 10-lb. bottles |
#72705 |
|
| |
|
| |
Nitrous Blow-Down Tube, Blow-Off Adapter & Safety Valve
CNC-machined Racer Safety Blow-Off Adapter replaces the standard safety valve to allow for the use of a
hard line blow-down tube like the Edelbrock Nitrous Blow-Down Tube. At 22" long, our blow-down tube is
longer than most competitors' tubes for easier installation. #72901 is a direct replacement for the safety
valves that come with all Edelbrock nitrous bottles (5-lb. and larger). A blow-down tube is an essential safety
feature for hatchbacks or cars with the bottle mounted in the passenger compartment. The blow-down tube
will safely vent the nitrous outside the car should the safety blow.
Racer Safety Blow-Off Adapter
#72961 includes a diffuser cap
for safer handling when bottle is
not mounted
|
 |
| |
| Nitrous Blow-Down Tube (22" long) |
#72960 |
| Racer Safety Blow-Off Adapter (for use with Blow-Down Tube) |
#72961 |
| Standard Replacement Safety Valve |
#72901 |
|
| |
|
| |
Bottle Nut & Washer
These kits contain a replacement -6AN or -4AN bottle nut and teflon washer to seal the bottle nut to the
bottle valve.
|
|
| |
| 4AN Bottle nut and teflon washer |
#76507 |
| 6AN Bottle nut and teflon washer |
#76505 |
| Teflon washer for 6AN & 4AN bottle nuts |
#77580 |
|
| |
|
| |
Bottle Nut Combo Wrench
This is one handy item to keep with your bottle. Compatible with all nitrous brands, fits in your glove box,
under your seat, or even in your pocket. This wrench features 3AN, 4AN, 6AN, and 1-1/4" bottle nut
wrenches all in one package. Black anodized aluminum and laser etched for a sharp, clean look!
|
 |
| |
| Bottle Nut Combo Wrench |
#76504 |
|
Carb/Plate Systems
