Nitrous & Fuel Pressure Gauges
Pressure gauges are an important element in getting maximum performance and consistency from
your nitrous system. The 1-1/2" nitrous gauges may be fitted onto a nitrous bottle or just in front of
the nitrous solenoid. Braided stainless steel lines are required for all remote mounted nitrous
gauges, see Stainless Steel Lines for more info.
2-5/8" gauges are illuminated and come with adapter fittings. Liquid-filled gauges offer additional
vibration dampening for durability and long-term accuracy. They are the best choice for competition
or severe duty applications.
|
 |
| |
| Nitrous Pressure Gauges, 0-1400 psi |
| 1-1/2" Standard Gauge |
#73800 |
| 1-1/2" Liquid-Filled Gauge |
#73801 |
| 2-5/8" Standard Gauge |
#73802 |
| |
| Fuel Pressure Gauges, 0-100 psi |
| 1-1/2" Standard Gauge |
#73825 |
| 1-1/2" Liquid-Filled Gauge |
#73826 |
| 2-5/8" Standard Gauge |
#73829 |
| 2-5/8" Liquid-Filled Gauge |
#73830 |
| |
| Fuel Pressure Gauges, 0-15 psi |
| 1-1/2" Standard Gauge |
#73831 |
| 1-1/2" Liquid-Filled Gauge |
#73832 |
| 2-5/8" Standard Gauge |
#73827 |
| 2-5/8" Liquid-Filled Gauge |
#73828 |
|
| |
 |
| |
Nitrous Plate Kits
Use Edelbrock Nitrous Plate Kits to upgrade existing nitrous systems. Nitrous plate kits include high-quality,
powder-coated aluminum nitrous plates, stainless steel jet assortment and stainless steel lines from plate to
solenoids. Available for square-bore, spread-bore and 4500 series carburetors.
|
 |
| |
| Performer Plate Kits |
| For standard-flange square-bore carburetors (50 to 100 hp) |
#70011* |
| For spread-bore (Q-Jet) carburetors (50 to 100 hp) |
#70012* |
| |
| Performer RPM Plate Kits |
| For standard-flange square-bore carburetors (100 to 250 hp) |
#70060* |
| For spread-bore (Q-Jet) carburetors (100 to 175 hp) |
#70061* |
| For 4500 Series carburetors (100 to 250 hp) |
#70063* |
| Pro-Flo EFI Nitrous Plate Kit (100 to 150 hp) |
#70071* |
|
| |
|
| |
Gauge/Purge Adapter
Use these adapters to install gauges or purge systems off of the bottle nut. Adaptable to all brands
of bottles.
|
 |
| |
| 4AN Gauge/Purge Adapter |
#76512 |
| 6AN Gauge/Purge Adapter |
#76510 |
|
| |
|
| |
Nitrous Nozzle Pipe Taps
Use these NPT taps to cut threads for custom installation of Edelbrock nitrous nozzles. Use Pipe Tap #76549
for Edelbrock Series 2, Series 3, and dry nozzles, #76559 is designed for Series 1 high-pressure nozzles.
|
 |
| |
| 1/16" NPT Pipe Tap (for Series 2, Series 3, and dry nozzles) |
#76549 |
| 1/8" NPT Pipe Tap (for Series 1 nozzles) |
#76559 |
|
| |
|
| |
3/16" Tube Bending Tool
Makes installation of those tough-to-bend direct port nitrous lines a breeze. Get a professional looking
installation every time. Can also be used on other 3/16" hard lines.
|
 |
| |
|
|
| |
|
| |
Distribution Blocks
Use these high-quality distribution blocks to build a custom nitrous system. Machined from billet aluminum
and anodized, they deliver even distribution and optimum flow. Inlets/outlets are 1/8" NPT.
|
 |
| |
| One-in, four-out Distribution Block (black) |
#76574 |
| One-in, four-out Distribution Block (blue, -6 for nitrous or fuel lines) |
#76538 |
| One-in, eight-out Distribution Block (black) |
#76578 |
| One-in, six-out Distribution Block (black) |
#76576 |
|
| |
|
| |
Progressive Nitrous Controller
Progressive Nitrous Controller #71900 allows you to control the amount of nitrous over a period of time by
providing a pulse width modulation to the solenoid. This unit allows the user to compensate for varying track
conditions and includes many key features including: 0-10 second delay timer; 10% to 100% duty cycle;
your choice of single or dual nitrous power ramps, and LED display with touch switch programming
|
 |
| |
| Progressive Nitrous Controller |
#71900 |
|
| |
|
| |
Time Delay Relay
The Time Delay Relay is used to activate a second or third stage of nitrous at adjustable pre-set intervals.
Timer activation begins when the unit receives a 12V trigger signal, such as transbrake release, and is
adjustable in increments of 1/10th of a second or less. |
 |
| |
|
|
| |
|
| |
Relay Assembly
Use the Edelbrock Relay Assembly as a replacement harness if you are transferring a nitrous system into
a different vehicle or with many other devices which require a wide open throttle activation.
|
 |
| |
| 30 Amp Relay Assembly (includes switches, relay, wiring and connectors) |
#72270 |
|
| |
|
| |
Purge Valve Kits
Keeps the supply of fresh liquid nitrous at the solenoid(s) for instant and repeatable nitrous injection. This
purge kit bleeds accumulated nitrous vapor from the supply lines. Includes solenoid, activation switch, filter,
aircraft-quality fittings and wiring.
|
 |
| |
| 4AN Purge Valve Kit |
#72176 |
| 6AN Purge Valve Kit |
#72178 |
|
| |
|
| |
Remote Electric Arming Valve Kit
Allows you to open and close the bottle valve with the flip of a switch from inside the driver's compartment.
|
 |
| |
| Remote Electric Arming Valve Kit |
#72950 |
|
| |
|
| |
1/4-Turn Ball Valve Kit
Our new 1/4-Turn Ball Valve Kit is designed as an emergency shut off to isolate the nitrous in the bottle from
the engine compartment in case of an emergency. The valve is typically installed in the driver's compartment
within reach of the driver. If an accident or fire occurs, the driver or emergency personnel need only turn the
handle a 1/4 of a turn to shut off nitrous flow to the solenoids.
|
 |
| |
| 1/4-Turn Ball Valve Kit |
#72952 |
|
Carb/Plate Systems
