Victor Pro Direct Port Nitrous System
EDELBROCK SOLENOIDS
Designed for Edelbrock nitrous systems, these stainless steel solenoids have a very low amp draw. They
feature a stainless steel base for corrosion resistance and tighter tolerances, a low current-consumption coil,
a teflon plunger for reliability and longevity, and a powder-coated coil cover for durability and appearance.
The Victor Pro nitrous solenoid is perfect for racers because the bottom outlet design restricts flow much
less then a standard design solenoid. This feature, combined with a .115" internally drilled metering orifice,
make this our highest flowing nitrous solenoid. The Victor Pro fuel solenoid features a shorter body
with a smaller diameter stainless steel base for use where space is limited.  Important note about Amp
Draw: All ratings listed below are under a load condition (for example: 950 psi nitrous and a minimum of 6
psi fuel pressure). Please note that other manufacturers may list amp draw under a "no load" condition
which is not realistic.
|
 |
| |
| Nitrous Solenoids - Amp Draw: 9.2 amps @ 13.8 volts and 11 amps @ 12.6 volts |
| Performer Nitrous Solenoid - up to 150 HP with 1/8" NPT inlet & outlet |
#72000 |
| Performer RPM Nitrous Solenoid - 250+ HP with 1/4" NPT inlet & 1/8" NPT outlet |
#72001 |
| Victor Pro "Bottom Exit" Nitrous Solenoid - 500+ HP with 1/4" NPT inlet & 1/8" NPT outlet |
#72002 |
| |
| Fuel Solenoids - Amp Draw: 1.29 amps @ 13.8 volts and 1.5 amps @ 12.6 volts |
| Performer Fuel Solenoid - up to 150 HP at 6 PSI with 1/8" NPT inlet & outlet |
#72050 |
| Performer RPM Fuel Solenoid - 250+ HP at 6 PSI with 1/4" NPT inlet & 1/8" NPT outlet |
#72051 |
| Victor Pro "Small Base" Fuel Solenoid - 500+ HP at 6 PSI with 1/8" NPT inlet & outlet |
#72052 |
|
| |
 |
| |
Alcohol Fuel Solenoid
Because it takes twice as much alcohol to make the same power as gasoline, nitrous racers need a solenoid
with twice the flow capacity. This Alcohol Fuel Solenoid will support nitrous system flow requirements to
600+ HP, yet features a low amperage draw to ease the drain on your electrical system.
|
 |
| |
| Alcohol Fuel Solenoid |
#72054 |
|
| |
|
| |
Solenoid Rebuild Kits & Coils
Rebuild Kits include Teflon® plunger, O-ring, plunger spring, and stem wrench.
Replacement coils sold separately.
|
| |
| Solenoid Description |
Rebuild Kits |
Replacement Coils |
| Performer Nitrous Solenoid |
#72200 |
#72204 |
| Performer RPM Nitrous Solenoid |
#72219 |
#72205 |
| Victor Pro Nitrous Solenoid |
#72219 |
#72217 |
| Performer Fuel Solenoid |
#72201 |
#72206 |
| Performer RPM Fuel Solenoid |
#72203 |
#72207 |
| Victor Pro Fuel Solenoid |
#72218 |
#72216 |
|
| |
|
| |
Solenoid Brackets
Billet aluminum, CNC-machined plate mounts four- and two-solenoid applications. Two-Solenoid kits
can be used with Performer and Performer RPM systems for a professional-looking installation. Match the
four-solenoid brackets with our Performer RPM Dual-Stage, or Victor Jr. Plate System.
Note: Not for use with Victor Pro fuel solenoid.
|
 |
| |
| 4-Solenoid Bracket for 4500 Series carbs |
#72286 |
| 4-Solenoid Bracket for square-flange carbs |
#72287 |
| 2-Solenoid Bracket for 4500 Series carbs |
#72288 |
| 2-Solenoid Bracket for square-flange carbs |
#72289 |
| 2-Solenoid Bracket for Q-Jet carbs |
#72290 |
| Performer RPM Nitrous/Fuel/Alcohol and Victor Pro Nitrous Solenoid Bracket |
#72275 |
| Bolt-On Performer Fuel and Nitrous Solenoid Bracket |
#72276 |
| Bolt-On Victor Pro Fuel Solenoid Bracket |
#72278 |
|
Carb/Plate Systems
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}