|
|
 |
| NITROUS SYSTEMS - Plate/Carb |
|
|
 |
 |
| Please select Accessory type. |
 |
|
|
|
| Victor Jr. Nitrous Systems & Plate Kits |
| |
SINGLE-STAGE:
200-400+ HP ADJUSTABLE
Dyno tests on a 500-inch Chevy proved that even at 400 HP settings, EGTs varied less than 5% from
cylinder-to-cylinder. Features include shorter spray bars allowing more liquid nitrous to be injected into
the intake for more even distribution across the plenum, a more balanced air/fuel ratio and a
quicker response time. With four nitrous and four fuel jets, the Edelbrock Victor Jr. Plate System has more
tuning capabilities than any plate system currently available. This efficient design, with a billet aluminum
plate that's only 9/16" thick, uses less nitrous than conventional plate systems at the same power levels.
Kits include everything shown to the left including a 10-lb. nitrous bottle (shipped empty), stainless steel jet
selection, hardware and owner's manual for a complete installation. Add billet aluminum Solenoid Brackets #72286 or #72287
found in Nitrous Systems accessories
for an even more professional looking installation. |
|
 |
|
|
 |
| |
| Standard Flange Square-Bore carbs (200-300-400+ HP) |
#70056 |
| 4500 Series carbs (200-300-400+ HP) |
#70055 |
|
|
 |
| |
VICTOR JR. UPGRADE KITS
Victor Jr. Upgrade Kits allow you to upgrade from a Performer RPM Nitrous System to a Victor Jr. Nitrous
System, which is capable of 200-400+ added horsepower. These kits include everything needed for
installation including Performer RPM fuel and nitrous solenoids, lines, gaskets, studs, stainless steel jets,
9/16" thick billet aluminum black anodized injection plate with intersecting "Dead Head" spray bars and
owner's manual. This design has proven to produce the best nitrous and fuel distribution of any spray bar
plate on the market, with adjustable power levels of 200, 300, and 400+ horsepower. |
|
|
|
|
 |
| |
| Square-Bore carbs (200-400+ HP) |
#70024 |
| 4500 Series carbs (200-400+ HP) |
#70025 |
|
|
|
VICTOR JR. PLATE KITS
Victor Jr. Plate Kits are for those who already have a bottle kit and solenoids and want to add our
unique spray bar plate. Plate Kits include only the spray bar plate, solenoid lines, gaskets, studs and
stainless steel jets. |
|
|
|
|
| |
| Square-Bore carbs |
#70014 |
| 4500 Series carbs |
#70015 |
|
| |
| ENGINE MODIFICATIONS |
Recommended |
Required |
| Single Plane Intake Manifold |
-- |
X |
| Race Fuel |
-- |
X |
| Upgraded Fuel System |
-- |
X |
| Dedicated Fuel Pump |
X |
-- |
| Upgraded Ignition System |
-- |
X |
| Ignition Retard |
-- |
X |
| Colder Spark Plugs |
-- |
X |
| Forged Pistons |
-- |
X |
| Upgraded/Aftermarket Rods & Crank |
X |
-- |
|
|
|
Carb/Plate Systems
