PERFORMER® POWER PACKAGES - Idle to 5500 RPM
PERFORMER® PACKAGES
STREET LEGAL* POWER FROM IDLE TO 5500 RPM

An Edelbrock Performer Power Package is designed to greatly increase performance and driveability in the low- to mid-rpm range. Performer packages provide incredible power for passing, towing, climbing grades, daily driving or traveling across the country in an RV. Your stock engine will be more efficient, with the potential for increased mileage and lower exhaust emissions. The main components of this package include: intake manifolds, carburetors, camshafts and cylinder heads. For late-model fuel injected vehicles, Performer intake manifolds offer performance improvements with emissions equipment compatibility. Camshafts and cylinder heads are also available for these vehicles. Performer Multi-Point EFI Systems for GM vehicles originally equipped with throttle body injected V8s, Tubular Exhaust System headers, Shorty Headers, SDT Series Mufflers and Cat-Back Systems are available to increase performance even further. Download the Power Package Guide (PDF) here.

AMC
Induction Valvetrain
Engine Intake Manifolds & EFI Systems (C) Carburetor or Throttle Body Size Cylinder Heads (C) Camshaft & Lifters Timing Chain Gear Drive Valve Springs (E) non-rotate, rotate Valve Spring Kits
290-304-343-360-401 V8 1970-91 2131 600-650 cfm 60139 2132 7818 - 5832, 5932 (F)
304-360-401 V8 EGR 1970-91 3731 500-650 cfm - 2132 7818 - 5832, 5932 (F)

BUICK
Induction Valvetrain
Engine Intake Manifolds & EFI Systems (C) Carburetor or Throttle Body Size Cylinder Heads (C) Camshaft & Lifters Timing Chain Gear Drive Valve Springs (E) non-rotate, rotate Valve Spring Kits
231-252 V6 even-fire 1979-84 5486 500 cfm - 5487 7829 - - (F)

CHEVROLET
Induction Valvetrain
Engine Intake Manifolds & EFI Systems (C) Carburetor or Throttle Body Size Cylinder Heads (C) Camshaft & Lifters Timing Chain Gear Drive Valve Springs (E) non-rotate, rotate Valve Spring Kits
2.8L V6 longitudinal ’82-85 2V 3785 & 3787 - - 3790 (B) - - - (F)
2.8L V6 longitudinal ’82-85 4V (D) 3785 & 3789 - - 3790 (B) - - - (F)
200, 229, 90° V6 1978-86 (A) 2111 500 cfm (D) - 2112 (A) 7331/32, 7800/01 7890 5813, 5913 (F)
4.3L 90° V6 T.B.I. 1987-95 3713 - - 3714 (A) 7332, 7801 - 5814 (F)
262-400 V8 1957-86 2101, 2601, 2701 600-650 cfm (D) 60759 2102, 2103, 2208 (G) 7331, 7800, 7802 7890 5802, 5902 5894
283-400 V8 w/Vortec or E-Tec ’57-99 2116, 2716 600-650 cfm (D) 60979 2102, 2103 7331, 7800, 7802 7890 - -
305-400 V8 1987-95 non-EGR (A) 2104, 2604 600-650 cfm (A,D) 60859 2102, 2103 7331, 7800, 7802 7890 5802, 5902 5894
262-400 V8 ’73-86 EGR (not H.O. or T.P.I.) 3701 600-650 cfm (D) 60759 2102, 2103 7331, 7800, 7802 7890 5802, 5902 5894
305 V8 EGR LG4 1978-86 3701 - 60759 3702 7331, 7800, 7802 7890 5802, 5902 5894
305 V8 EGR L69 1978-86 3701 - 60759 - 7331, 7800, 7802 7890 5802, 5902 5894
262-400 V8 EGR 1987-95 3706 - 60859 2102, 2103 (B,D) 7331, 7800, 7802 7890 5802, 5902 5894
305, 350 V8 T.B.I. 1987-95 3704 - 60859 3702 (A,D) 7331, 7800, 7802 - 5802, 5902 5894
350 V8 T.B.I. 1987-95 3501, 3502 - 60859 3702 (A,D) 7331, 7800, 7802 - 5802, 5902 5894
396-427-454 V8 1965-90 2161 600-800 cfm 60479 2162 (A) 7334, 7809, 7810 7891 5862 5895
402-454 V8 EGR 1972-89 3761 - 60479 - 7334, 7809, 7810 7891 5862 5895
454 V8 T.B.I. 1987-95 (Mk IV) (Gen V) 3764 - 60499 - 7334, 7809, 7810 - 5862 5895
454 V8 T.B.I. 1987-95 (Mk IV) (Gen V) 3562, 3563 - 60499 - 7334, 7809, 7810 - 5862 5895

CHRYSLER
Induction Valvetrain
Engine Intake Manifolds & EFI Systems (C) Carburetor or Throttle Body Size Cylinder Heads (C) Camshaft & Lifters Timing Chain Gear Drive Valve Springs (E) non-rotate, rotate Valve Spring Kits
318-340-360 V8 1964-91 2176 600-650 cfm - 2177 7803 - 5877, 5977 (F)
318-340-360 V8 EGR 1972-91 3776 - - 2177 (A) 7803 - 5877, 5977 (F)
361-383-400 V8 1959-79 2186 600-800 cfm - 2192 (A) 7804 - 5892, 5992 (F)
413-440 V8 1959-79 2191 750-800 cfm - 2192 (A) 7804 - 5892, 5992 (F)

FORD
Induction Valvetrain
Engine Intake Manifolds & EFI Systems (C) Carburetor or Throttle Body Size Cylinder Heads (C) Camshaft & Lifters Timing Chain Gear Drive Valve Springs (E) non-rotate, rotate Valve Spring Kits
289-302 V8 Early Models 1965-95 2121 500-650 cfm 60329, 60359 2122 (A) 7335, 7811/14/20 7892 5822, 5922 5896
289-302 V8 EGR except EFI 1973-85 3721, 3723 - 60329, 60359 2122 (A) 7335, 7811/14/20 7892 5822, 5922 5896
5.0L V8 EFI 1986-93 Mustang GT/LX 3821 70mm (B) 60379, 60399 3722 7811, 7814 7892 5822 (F)
5.0L V8 EFI 1994-95 Mustang GT 3821 70mm (B) 60379, 60399 3722 7811, 7814 7892 5822 (F)
5.0L V8 EFI 1987-95 trucks 3841 - 60379, 60399 - 7811, 7814 7892 5822 (F)
5.8L V8 EFI 1988-95 trucks 3881 - 60379, 60399 3782 (A) 7811, 7814 7892 5822 (F)
351W V8 1969-95 2181 600-650 cfm (D) 60329, 60359 2182 7335, 7811/14/20 7892 5882, 5982 (F)
351W V8 EGR except EFI 1973-95 3781, 3783 - 60329, 60359 2182 (A) 7811/7814 7892 5882, 5982 (F)
351M-400 V8 1971-82 2171 600-650 cfm - 2172 7821 - 5872, 5972 (F)
351M-400 V8 EGR 1973-82 3771 - - 2172 (A) 7821 - 5872, 5972 (F)
352-360-390-427-428 V8 1958-76 2105 600-800 cfm - 2106 (A) 7808 - 5806, 5906 (F)
429-460 V8 1968-87 2166 650-800 cfm - 2167 7830 7894 5867 (F)
429-460 V8 EGR 1973-87 except EFI 3766 - - 2167 (A) 7830 7894 5867 (F)

OLDSMOBILE
Induction Valvetrain
Engine Intake Manifolds & EFI Systems (C) Carburetor or Throttle Body Size Cylinder Heads (C) Camshaft & Lifters Timing Chain Gear Drive Valve Springs (E) non-rotate, rotate Valve Spring Kits
330-350-403 V8, 1964-85 2711, 3711 - - 3712 (A,B) 7813 - 5812 (F)
400-425-455 V8, 1967-76 2151 750-800 cfm - 2152 7813 - - (F)

PONTIAC
Induction Valvetrain
Engine Intake Manifolds & EFI Systems (C) Carburetor or Throttle Body Size Cylinder Heads (C) Camshaft & Lifters Timing Chain Gear Drive Valve Springs (E) non-rotate, rotate Valve Spring Kits
350-455 V8 1965-79 2156 600-800 cfm 60579 2157 (A) 7812 7895 5857 (F)
 
*Many Performer Power Package components are street legal. See separate listings for details.

Check the part description in each section to determine if the part is legal for sale or use on pollution controlled motor vehicles.

(A) Certain exclusions apply; read the listing for this part or call our Tech Line
(B) Throttle body must be used with matching EGR plate
(C) Manifolds, heads and water pumps also available with polished finish
(D) Not for computer-controlled engines
(E) Retainers and keepers available for these springs (for stock heads only)
(F) Retainers and keepers available separately
(G) Hydraulic roller cam
Sign Up To Receive Our Newsletter & Members Only Specials  
Privacy Policy | Order A Catalog | Warranty Information| Site Map
©2009 Edelbrock Corporation