 |
#91100
Basic ECU (32 bit processor, 8 analog channels & 6 digital channels)
|
Building a custom QwikData may be your solution. Simply combine ECU, harness and desired sensors to build your own data acquisition system. |
 |
 |
#91101
Advanced ECU (32 bit processor, 24 analog channels & 6 digital channels)
|
This is the most powerful and flexible QwikData ECU available. Select this ECU to configure your own professional data acquisition package. Simply combine ECU, harness and desired sensors to prepare and dominate in any racing discipline. |
 |
 |
#91102
Basic ECU Upgrade (original ECU must be sent to Edelbrock)
|
QwikData is expandable. If you already own a Basic QwikData ECU and are ready to step up to the next level, send us your ECU. We'll upgrade your ECU to match the specs for the Advanced unit. Must purchase Advanced Drag Racing Harness #91104. |
 |
 |
#91103
Bracket Racing Wiring Harness (8 analog & 6 digital channels)
|
This fully assembled wiring harness can be used as part of your custom tailored QwikData package or as a replacement harness for the Bracket Racing Package. |
 |
|
#91104
Advanced Drag Racing Harness (24 analog & 6 digital channels) |
The basic unit comes equipped with 8 analog inputs and 6 digital inputs. The advanced unit has 24 analog input channels and 6 digital inputs. The digital inputs can record on/off events, frequency (such as mph, rpm and digital mass air flow sensor), or duty cycle (such as fuel injectors and turbo boost controller). |
 |
|
#91106
Analog Input Extension Wiring Harness |
4 ft. plug in extension harness to extend the analog channel wiring. One harness extends 4 analog inputs. |
 |
|
#91107 PC Desktop Harness |
Mini harness with 120V AC adapter allows you to easily download stored runs from QwikData at home, office or race trailer. |
 |
 |
#91147
USB to Series Converter Communications Cable
|
This is a USB to Serial communications adapter cable. It is use to convert a Laptop or PC USB port to a 9-pin RS232 serial communications connector. Software drivers will be included on supplied CD. |
 |
 |
#91108
TK -4 Thermocouple Signal Converter |
Conditions four Type K thermocoupler signals to a 0-10V signal for use with QwikData. |
 |
 |
#91111 General Purpose Thermocouple Extension Wiring Harness |
4 ft. cable and plugs to extend general purpose thermocouple harness to TK-4 thermocouple converter. |
 |
 |
#91109 EGT Thermocouple (analog, 1/8" NPT) |
90° EGT probe installs in exhaust headers to monitor combustion. Use in conjunction with TK thermocouple signal converter. Includes: EGT Probe, 1/8" NPT steel weld-in bung and 4 ft. stainless braided cable. |
 |
 |
#91128 EGT Weldment Kit (2 per package) |
1/8" NPT steel weld in bung for mounting EGT Probe into exhaust headers. |
 |
|
#91140 EGT Probe Compression Fitting |
Replacement steel fitting to be used when removing an EGT probe or replacing an exhaust header. Includes: ferrule and 1/8" NPT compression fitting. |
 |
 |
#91120
Non-Contact Thermocouple (analog) |
Infrared temperature sensor commonly used for monitoring tire, track, cylinder head and other temperatures. Range: 32° to 662° F. |
 |
|
#91123 String Potentiometer (analog) |
Range: 0-5". For measuring throttle position, steering angle, chassis flex, etc. |
 |
|
#91124 Linear Potentiometer (analog) |
Range: 0-5". Includes dual rod ends to measure suspension travel, steering angle, etc. |
 |
 |
#91112 Pressure Transducer (0-100 PSI, analog) |
1/8" NPT stainless steel pressure sensor. Monitor turbo/supercharger boost, oil pressure, etc. |
 |
 |
#91113 Pressure Transducer (0-500 PSI, analog) |
1/8" NPT stainless steel pressure sensor. Monitor fuel pressure, transmission pressure, etc. |
 |
 |
#91114 1/8" NPT stainless steel pressure sensor. |
Pressure Transducer (0-2500 PSI, analog) Monitor brake pressure, nitrous bottle pressure, etc. |
 |
 |
#91122 Fuel Flow Meter (digital) |
-8AN inlet/outlet. Range: 1-10 gallons per minute. Turbine meter to measure fuel flow volume. Fuels: all racing gasolines and methanol. |
 |
 |
#91125 Fuel Flow Meter (digital) |
-10AN inlet/outlet. Range: 1.25-12.5 gallons per minute. Turbine meter to measure fuel flow volume. Fuels: all racing gasolines, methanol and nitro. |
 |
 |
#91126 Fuel Flow Meter (digital) |
-12AN inlet/outlet. Range: 2-20 gallons per minute. Turbine meter to measure fuel flow volume. Fuels: All racing gasolines, methanol and nitro. |
 |
|
#91116 Shaft Sensor (magnetic) |
Replacement sensor for all magnetic type shaft speed sensors. |
 |
|
#91117 Cobalt Magnet (2 per package)
|
Replacement rare earth magnets for all shaft speed sensors. |
 |
 |
#91195 Digital Driveshaft Speed Sensor Kit (3.125 O.D. X 1.875 I.D.) |
CNC machined billet aluminum collar for monitoring driveshaft rotation. Includes: 2 piece anodized aluminum collar, four cobalt magnets, magnetic speed sensor and mounting bracket. |
 |
 |
#91196 Digital Driveshaft Speed Sensor Kit (3.125 O.D. X 2.187 I.D.) |
CNC machined billet aluminum collar for monitoring driveshaft rotation. Includes: 2 piece anodized aluminum collar, four cobalt magnets, magnetic speed sensor and mounting bracket. |